On Sat, Nov 09, 2019 at 11:38:54AM -0500, Chris Ross wrote: > On Fri, Nov 08, 2019 at 02:28:17PM -0800, Doug Ambrisko wrote: > > On Tue, Nov 05, 2019 at 09:44:36PM +0100, Miroslav Lachman wrote: > > | Chris Ross wrote on 11/05/2019 21:19: > > | > On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote: > > | >> Chris Ross wrote on 11/05/2019 19:34: > > | >>> Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls > > itself > > | >>> "Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5. > > | >>> Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, > > which > > | >>> looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this > > should > > | >>> be supported by the mpr(4) driver, but it doesn't seem to recognize it > > | >>> at boot time. > > | > > | mpr_load="YES" goes to /etc/loader.conf > > | > > | If you need to load mpr manually in boot prompt I am not sure if it > > | should be: > > | load mpr > > | or > > | load mpr.ko > > | of full path > > | load /boot/kernel/mpr.ko > > > > This should be a mrsas card and not an HBA! mrsas supports all current > > UCS RAID cards ... and the next unreleased UCS system :-) You might need > > the one in -current for that. I'm not sure what is in 12.1. > > Hi Doug! Thanks. Okay, I infer from that that the mpr driver is for > HBAs that aren't raid? Grepping through the sources for 3516 found me > only mpr. Looking more carefully, at mrsas while knowing specifically > what I'm looking for, I find the PCI device ID (0x0014) as "AVAGO Ventura > SAS Controller". And, that code (mrsas) is about the same in stable-12 as > is it in -current. > > Can you provide some guidance of what I need to do to get the mrsas > driver to identify it when booting the install ISO?
See the "PRIORITY" section of https://www.freebsd.org/cgi/man.cgi?query=mrsas&sektion=4 You can also set that tunable via the loader Regards, Gary _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
