Yagertiny Алексей wrote: > Hello everyone! > > We have a problem since version 10.3 (bug 209468 [1]). There is no > availability to boot system if some of adaptec raid controllers are used. > Could you be so kind as to pay attention to it? > > [1] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=209468
I have built a -CURRENT disc1.iso with the patch provided in PR. It seems to work without issues with older ASR 6805 having 8 disks in RAID10 (below). It would be nice if you could try installing this and report if it works for you on newer adapters that you have; if everything looks OK, I'll put it out for review, and hopefully commit. https://people.freebsd.org/~yuripv/FreeBSD-13.0-CURRENT-amd64-20181202-r341364-disc1-aacraid.iso NOTE: as this is a -current snapshot, please use it for testing only. aacraid0: <Adaptec RAID Controller> mem 0xdbf00000-0xdbffffff,0xdbebf800-0xdbebffff,0xdbebf400-0xdbebf4ff irq 76 at device 0.0 on pci5 aacraid0: Enable Raw I/O aacraid0: Enable 64-bit array aacraid0: using MSI interrupts aacraid0: New comm. interface type1 enabled aacraid0: Adaptec 6805, aacraid driver 3.2.10-1 aacraidp0 on aacraid0 aacraidp1 on aacraid0 aacraidp2 on aacraid0 aacraidp3 on aacraid0 da0 at aacraidp0 bus 0 scbus7 target 0 lun 0 da0: <Adaptec Array V1.0> Fixed Direct Access SPC-2 SCSI device da0: Serial Number A12B55B400 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 1716224MB (3514826752 512 byte sectors) ses0 at aacraidp3 bus 0 scbus10 target 0 lun 0 ses0: <ADAPTEC Virtual SGPIO > Fixed Enclosure Services SPC-3 SCSI device
signature.asc
Description: OpenPGP digital signature
