On Wed, 07 Nov 2018 23:56:26 +0100, Jordan Caraballo
<jordancaraball...@gmail.com> wrote:
Hi guys,
After configuring ipmi serial over lan console, I am not being able to
execute any command related to sudo; not even "sudo su -". I am using
ttyu0
and COM1 on a Dell R530. Everything regarding receiving output and typing
at the serial console is fine; the only command not working is sudo.
What do you mean by 'not working'? Is there an error message? Does it
hang? Do you get logged out?
Regards,
Ronald.
Any ideas? Below are the configurations.
/etc/ttys
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
#ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu0 "/usr/libexec/getty std.115200" vt100 on secure
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure
/boot/loader.conf
# ipmi enabled
ipmi_load="YES"
# ipmi configurations
boot_multicons="YES"
boot_serial="YES"
# serial configurations for COM1
console="comconsole,vidconsole"
comconsole_speed="115200"
comconsole_port="0x3F8"
hint.uart.0.flags="0x00"
hint.uart.2.flags="0x10"
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
