Am 2018-10-04 05:53, schrieb Holger Kipp:
Dear Rainer,
if no one else is experiencing these errors, then it is probably a
hardware error.
I had once encountered problems with incompatible memory (combination
of memory (ok with other boards) and board (ok with other memory) did
not work properly). The issue could be triggered with a simple
buildworld within minutes. However memtest86 could run for hours
without finding a thing.
Please don‘t rely on memtest86 if it does not report any problems.
To be sure: check / adjust memory timings, remove and/or replace
memory modules and try to trigger the error again.
Best regards,
Holger Kipp
I have this problem on two machines, actually.
It would be highly unlikely for both to have hardware problems.
Though possible, of course.
Reducing ARC seems to help, though, and I assume that is the problem the
machine ran into because I still have 29GB out of 32GB wired now, with
an ARC limited to 60% of kmem_size.
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
