It appears that I just got lucky the one time. The same USB stick continues to mount only about half the time; other USB devices also have problems. It appears to me that the APU2 USB3 controller is not working correctly. I’ve started a new thread over on freebsd-usb@
Stefan > Am 09.07.2018 um 13:12 schrieb Stefan Bethke <s...@lassitu.de>: > > Thanks for the suggestions! > > I did manage to get a working stick; the first couple of tries I did from m > MacBook Pro; finally I moved the stick to a physical FreeBSD box. Maybe the > Mac somehow "repaired" the GPT/MBR on the stick, making it invisible to the > FreeBSD kernel? But then at least da0 should have shown up. Maybe I just got > lucky. > > If anyone is interested, I can try re-creating the issues for a week or two > while I still have the APU in a lab setting. > > Stefan > >> Am 08.07.2018 um 18:02 schrieb Stefan Bethke <s...@lassitu.de>: >> >> I'm stumped by a weird error: loader loads the kernel, and the kernel probes >> the USB stick successfully, but da0 never shows up. I’ve tried with >> FreeBSD-11.1-RELEASE-amd64-memstick.img and >> FreeBSD-11.2-RELEASE-amd64-memstick.img. >> >> While at the mount root prompt, unplugging and replugging the USB stick and >> entering . repeatedly will show the kernel messages, but "da0 at umass0" >> never shows up. >> >> I’ve added a couple entries to /boot/loader.conf: >> # cat /mnt/boot/loader.conf >> vfs.mountroot.timeout="10" >> beastie_disable="YES" >> comconsole_speed="115200" >> console="comconsole" >> autoboot_delay="1" >> >> >> Here’s the console output from 11.1: >> Consoles: internal video/keyboard ce+0x67 >> BIOS drive C: is disk0 t vpanic+0x177 >> BIOS drive D: is disk1 t panic+0x43 >> BIOS 638kB/3668660kB available memory +0x1d95 >> 4 0xffffffff80a93b68 at start_init+0x48 >> FreeBSD/x86 bootstrap loader, Revision 1.1 >> (Fri Jul 21 02:03:08 UTC 2017 r...@releng2.nyi.freebsd.org) >> Loading /boot/defaults/loader.conf >> //boot/kernel/kernel text=0x14972f8 data=0x1384c0+0x4c15e8 >> syms=[0x8+0x15e8b0+0x8+0x178422]ild 20170228 >> /080 MB ECC DRAM >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel]... >> Copyright (c) 1992-2017 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 >> r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 >> FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM >> 4.0.0) >> VT(vga): resolution 640x480 >> CPU: AMD GX-412TC SOC (998.15-MHz K8-class >> CPU) >> Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> >> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> >> AMD >> Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> >> Structured Extended Features=0x8<BMI1> >> XSAVE Features=0x1<XSAVEOPT> >> SVM: NP,NRIP,AFlush,DAssist,NAsids=8 >> TSC: P-state invariant, performance statistics >> real memory = 4815060992 (4592 MB) >> avail memory = 4087992320 (3898 MB) >> Event timer "LAPIC" quality 100 >> ACPI APIC Table: <CORE COREBOOT> >> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >> FreeBSD/SMP: 1 package(s) x 4 core(s) >> ioapic1: Changing APIC ID to 5 >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> ioapic1 <Version 2.1> irqs 24-55 on motherboard >> SMP: AP CPU #1 Launched! >> SMP: AP CPU #2 Launched! >> SMP: AP CPU #3 Launched! >> Timecounter "TSC" frequency 998148849 Hz quality 1000 >> random: entropy device external interface >> kbd0 at kbdmux0 >> netmap: loaded module >> module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 >> nexus0 >> vtvga0: <VT VGA driver> on motherboard >> cryptosoft0: <software crypto> on motherboard >> acpi0: <CORE COREBOOT> on motherboard >> acpi0: Power Button (fixed) >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> cpu2: <ACPI CPU> on acpi0 >> cpu3: <ACPI CPU> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 950 >> acpi_button0: <Power Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 >> pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff >> pci1: <ACPI PCI bus> on pcib1 >> igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem >> 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1 >> igb0: Using MSIX interrupts with 5 vectors >> igb0: Ethernet address: 00:0d:b9:4b:e2:cc >> igb0: Bound queue 0 to cpu 0 >> igb0: Bound queue 1 to cpu 1 >> igb0: Bound queue 2 to cpu 2 >> igb0: Bound queue 3 to cpu 3 >> igb0: netmap queues/slots: TX 4/1024, RX 4/1024 >> pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port >> 0x2000-0x201f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 >> on pci2 >> igb1: Using MSIX interrupts with 5 vectors >> igb1: Ethernet address: 00:0d:b9:4b:e2:cd >> igb1: Bound queue 0 to cpu 0 >> igb1: Bound queue 1 to cpu 1 >> igb1: Bound queue 2 to cpu 2 >> igb1: Bound queue 3 to cpu 3 >> igb1: netmap queues/slots: TX 4/1024, RX 4/1024 >> pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port >> 0x3000-0x301f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 >> on pci3 >> igb2: Using MSIX interrupts with 5 vectors >> igb2: Ethernet address: 00:0d:b9:4b:e2:ce >> igb2: Bound queue 0 to cpu 0 >> igb2: Bound queue 1 to cpu 1 >> igb2: Bound queue 2 to cpu 2 >> igb2: Bound queue 3 to cpu 3 >> igb2: netmap queues/slots: TX 4/1024, RX 4/1024 >> pci0: <encrypt/decrypt> at device 8.0 (no driver attached) >> xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device 16.0 >> on pci0 >> xhci0: 32 bytes context size, 64-bit DMA >> xhci0: Unable to map MSI-X table >> usbus0 on xhci0 >> usbus0: 5.0Gbps Super Speed USB v3.0 >> ahci0: <AMD Hudson-2 AHCI SATA controller> port >> 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem >> 0xfeb25000-0xfeb253ff at device 17.0 on pci0 >> ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS >> ahcich0: <AHCI channel> at channel 0 on ahci0 >> ahcich1: <AHCI channel> at channel 1 on ahci0 >> ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device 19.0 >> on pci0 >> usbus1: EHCI version 1.0 >> usbus1 on ehci0 >> usbus1: 480Mbps High Speed USB v2.0 >> isab0: <PCI-ISA bridge> at device 20.3 on pci0 >> isa0: <ISA bus> on isab0 >> sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0 >> sdhci_pci0: 1 slot(s) allocated >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> uart0: console (115200,n,8,1) >> orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0 >> ppc0: cannot reserve I/O port range >> uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 >> hwpstate0: <Cool`n'Quiet 2.0> on cpu0 >> Timecounters tick every 1.000 msec >> nvme cam probe device init >> ugen1.1: <AMD EHCI root HUB> at usbus1 >> ugen0.1: <0x1022 XHCI root HUB> at usbus0 >> uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 >> uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >> ada0: <SATA SSD SBFM01.1> ACS-4 ATA SATA 3.x device >> ada0: Serial Number A4620782148900312898 >> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) >> ada0: Command Queueing enabled >> ada0: 15272MB (31277232 512 byte sectors) >> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... >> Root mount waiting for: usbus1 usbus0 >> uhub1: 4 ports with 4 removable, self powered >> uhub0: 2 ports with 2 removable, self powered >> Root mount waiting for: usbus1 usbus0 >> ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 >> uhub2 on uhub0 >> uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on >> usbus1 >> Root mount waiting for: usbus1 usbus0 >> ugen0.2: <Kingston DataTraveler G3> at usbus0 >> umass0 on uhub1 >> umass0: <Kingston DataTraveler G3, class 0/0, rev 2.00/1.00, addr 1> on >> usbus0 >> umass0: SCSI over Bulk-Only; quirks = 0x8100 >> umass0:2:0: Attached to scbus2 >> uhub2: 4 ports with 4 removable, self powered >> mountroot: waiting for device /dev/ufs/FreeBSD_Install... >> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. >> >> Loader variables: >> vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install >> vfs.root.mountfrom.options=ro,noatime >> >> Manual root filesystem specification: >> <fstype>:<device> [options] >> Mount <device> using filesystem <fstype> >> and with the specified (optional) option list. >> >> eg. ufs:/dev/da0s1a >> zfs:tank >> cd9660:/dev/cd0 ro >> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) >> >> ? List valid disk boot devices >> . Yield 1 second (for background tasks) >> <empty line> Abort manual input >> >> mountroot> ? >> >> List of GEOM managed disk devices: >> diskid/DISK-A4620782148900312898 ada0 >> >> mountroot> . >> >> mountroot> ? >> >> List of GEOM managed disk devices: >> diskid/DISK-A4620782148900312898 ada0 >> >> -- >> Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 >> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > > -- > Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 > > -- Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
