Hello Glen, On Tue, 15 May 2018 13:46:49 +0000, Glen Barber <g...@freebsd.org> wrote:
> On Sat, May 12, 2018 at 04:33:26PM -0500, Mike Karels wrote: > > I tried to boot 11.2-BETA1 on a BeagleBone Black that had been > > running 11.1-RELEASE. It didn't boot, falling back to the EMMC > > (which isn't bootable, a different problem). I was also unable to > > boot the snapshot from 12/20. I see that the boot partition has > > different contents: > > > > 11.1-RELEASE: > > MLO u-boot.img ubldr ubldr.bin > > > > 11.2-BETA1: > > MLO boot.scr u-boot.img ubldr.bin > > > > Has anyone else been able to boot on a BeagleBone? > > > > I saw this too with 11.2-BETA1, but due to inconsistencies between two > different BeagleBone SoCs used to test, could not rule out if the > problem was due to local hardware failure. > > Specifically, one of two I have has the EMMC overwritten to avoid > needing to "manually" boot FreeBSD, and the UART does not work > correctly (because I am dangerous with solder), and nothing outputted > on the HDMI console. The other system has working EMMC, seemingly > broken HDMI output, but working UART that only displayed repeated 'C' > when booting. Just tried FreeBSD-11.2-PRERELEASE-arm-armv6-BEAGLEBONE-20180504-r333226.img.xz on my working BBB but only got repeated 'C' on serial port. the boot partition on uSD shows: # ll /.autofs/da2s1 total 700 -rwxrwxrwx 1 root wheel 77092 2018-05-04 09:58 MLO* -rwxrwxrwx 1 root wheel 199 2018-05-04 11:43 boot.scr* -rwxrwxrwx 1 root wheel 393872 2018-05-04 09:58 u-boot.img* -r-xr-xr-x 1 root wheel 236388 2018-05-04 11:42 ubldr.bin* > > So, I wasn't entirely sure if it was "just me" or not. > > Could you please open a PR about this, assigned to freebsd-arm@ and > with re@ in CC? > > Glen > -- Best Regards. Christopher Hall. _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
