Hello again
PCI slot is 100% working, I just got another D-LINK PCI card (different
Chip, different driver) out of there that was working OK.
I spend some time and found this - some bootlog with exact this card. But I
think it does not really contain any useful information.
It was FreeBSD 9.1-STABLE #0 r246597M: Sun Feb 10 00:10:59 MSK 2013
pci1: <ACPI PCI bus> on pcib3
pci1: <network, ethernet> at device 0.0 (no driver attached)
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xc800-0xc8ff mem
0xdfdfc000-0xdfdfffff irq 21 at device 1.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:19:5b:86:3b:53
miibus1: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
There was a different hardware, but NIC is the same, it was lying for years
until now.
Now in boot log there's only
Nov 11 18:04:37 <kern.crit> diablo kernel: pcib5: <ACPI PCI-PCI bridge> at
device 30.0 on pci0
Nov 11 18:04:37 <kern.crit> diablo kernel: pci5: <ACPI PCI bus> on pcib5
Nov 11 18:04:37 <kern.crit> diablo kernel: pci5: <network, ethernet> at
device 1.0 (no driver attached)
And that's not really helping.
And finally I found a pciconf from this exact NIC
skc0@pci0:1:1:0: class=0x020000 card=0x4b011186 chip=0x4b011186
rev=0x11 hdr=0x00
vendor = 'D-Link System Inc'
device = 'DGE-530T Gigabit Ethernet Adapter (rev 11)'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xdfdfc000, size 16384, enabled
bar [14] = type I/O Port, range 32, base 0xc800, size 256, enabled
cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 03[50] = VPD
Do not know what version of FreeBSD is always was stable and the date was
02.2013, no VPD
2017-11-17 15:12 GMT+03:00 Mike Black <amdm...@gmail.com>:
> Hello
>
> VPD is
> none0@pci0:5:1:0: class=0x020000 card=0x4b011086 chip=0x4b011086
> rev=0x11 hdr=0x00
> vendor = 'J. Bond Computer Systems'
> class = network
> subclass = ethernet
> bar [10] = type Memory, range 32, base 0xfebec000, size 16384,
> enabled
> bar [14] = type I/O Port, range 32, base 0xee00, size 512, enabled
> cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3
> cap 03[50] = VPD
> VPD ident = 'DGD-530T Ghgabht Ethernet @dapte'
>
> But I see... it says some DGD-530T... Do not know why, because it's
> DGE-530T for sure.
>
> So you're saying this it hardware degradation?
> I will try to find some windows host and plug it in there to check it.
>
> 2017-11-17 13:19 GMT+03:00 YongHyeon PYUN <pyu...@gmail.com>:
>
>> On Fri, Nov 17, 2017 at 09:55:03AM +0300, Mike Black wrote:
>> > Hello. I looked into svn code for 8.3R and 11.1R and there seems no
>> changes
>> > in descriptors/identifiers. So I think that NIC is being wrongly
>> identified
>> > during startup process - it is being recognized with a wrong PCI VID.
>> How
>> > can this be checked or fixed?
>> > I use a loadable kernel module after a startup, so there is no useful
>> > messages during boot process.
>> >
>>
>> It seems it's single bit error but if it's dying there would no way
>> to get fixed. Given that pciconf(8) says VPD capability, try to
>> read it(i.e. pciconf -lcbvV). Generally VPD contains a readable
>> product string so you may be able to know whether there are other
>> errors. If vendor ID is the only corrupted one, you can simply
>> patch the device ID in the driver.
>>
>> > 15 нояб. 2017 г. 11:00 PM пользователь "Mike Black" <amdm...@gmail.com>
>> > написал:
>> >
>> > > Hello
>> > >
>> > > I've got old PCI NIC D-Link DGE530T Rev 11 with SysKonnect chip on it.
>> > > Years ago it worked in FreeBSD 8/9 Stable with if_sk driver.
>> > >
>> > > Now I'm runnig
>> > > 11.1-STABLE FreeBSD 11.1-STABLE #1 r323214: Sat Nov 11 19:06:20 MSK
>> 2017
>> > > amd_miek@diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64
>> > > 1101502 1101502
>> > >
>> > > But recently I plugged this card back and it's not being recognized
>> by a
>> > > driver.
>> > >
>> > > pciconf says that is
>> > > none0@pci0:5:1:0: class=0x020000 card=0x4b011086
>> chip=0x4b011086
>> > > rev=0x11 hdr=0x00
>> > > vendor = 'J. Bond Computer Systems'
>> > > class = network
>> > > subclass = ethernet
>> > > bar [10] = type Memory, range 32, base 0xfebec000, size 16384,
>> > > enabled
>> > > bar [14] = type I/O Port, range 32, base 0xee00, size 512,
>> enabled
>> > > cap 01[48] = powerspec 2 supports D0 D1 D2 D3 current D3
>> > > cap 03[50] = VPD
>> > >
>> > > According /usr/share/misc/pci_vendors this D-link should have
>> 4b011186 not
>> > > 4b011086.
>> > > I looked into driver code (if_sk) and it expects 1186 card also.
>> > > I googled about this issue but found no one similar in a recent years
>> > > So I'd like to know what's wrong - some changes in driver in a recent
>> > > years or smth going wrong while OS detecting this NIC. But that's
>> > > confusing, because this exact NIC worked years ago...
>> > >
>> > > --
>> > > amd_miek
>> > > Think different.
>> > > Just superior.
>>
>
>
>
> --
> amd_miek
> Think different.
> Just superior.
>
--
amd_miek
Think different.
Just superior.
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
