On Fri, Oct 20, 2017 at 05:13:45PM +0200, Markus Wild wrote: > Hello list, > > I have a particularly odd problem, where I can't figure out what's going on, > or whether I'm possibly doing something > stupid... > > Short summary: > - Supermicro X10DRI-T motherboard, using UEFI boot, 128G RAM, 2 CPUs > - 2 Intel DC P3700 NVME cards, to be used as mirrored zfs root and mirrored > log devices for a data pool > - FreeBSD-11.1 release installs fine off memstick, and the built system boots > correctly, but this system uses the entire > disks (so I need to shrink the system to make room for log partitions) > - so I then rebooted into usb live system, and did a gpart backup of the nvme > drives (see later). zfs snapshot -r, zfs > send -R > backup, gpart delete last index and recreate with shorter size on > both drives, recreate zroot pool with > correct ashift, restore with zfs receive from backup, set bootfs, reboot > - the rebooting system bootloader finds the zroot pool correctly, and > proceeds to load the kernel. However, when it's > supposed to mount the root filesystem, I get: > Trying to mount root from zfs:zroot/ROOT/default []... > Mounting from zfs:zroot/ROOT/default failed with error 6. > - when I list the available boot devices, all partitions of the nvme disks > are listed
My suspicion is that you didn't make a backup of the new /boot/zfs/zpool.cache >From the USB live booted system, when you recreated the zpool you likely changed parameters that live in the cache. You need to copy that to the new boot pool or ZFS can get angry Just a suspicion Regards, Gary _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"