Hi Patrick,
* Patrick M. Hausen wrote:
smbios.system.product="ProLiant MicroServer Gen8"
CPU: Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz (2294.80-MHz K8-class CPU)
16 GB RAM, FreeBSD installation was no problem at all.
You got me. I just double checked. 16GB is the limit. You're right.
What do you mean by "JBOD support"? Disable RAID in the systems BIOS
setup, put ZFS on AHCI drives ...
Activating JBOD deactivates the B120i raid controller. Unfortnately the
temperature sensor is somehow controlled by the raid controller. So enabling
JBOD technically works, but the machine is a lot louder than with enabled
raid. As a workaround I've built 4 raid arrays with one disk each.
It works, but it doesn't feel right to me.
It's my home file server sitting basically next to my monitor. In an office
environment, you probably don't care about the noise so much.
See:
https://community.hpe.com/t5/ProLiant-Servers-Netservers/MicroServer-Gen8-is-noisy/td-p/6171563
Best Regards,
Stefan
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
