On Tue, 21 Feb 2017 10:39+0100, Ingeborg Hellemo wrote: > > I'm in the process of upgrading my 10.3 servers to 11.0. I have stumbled upon > problems with lagg on two boxes. > > They both have QLogic NetXtreme II BCM57800 10GbE network card using the bxe > driver. > > My lagg configuration is unchanged in the process but after upgradring to > 11.0 > lagg is no longer working. > > /etc/rc.conf: > ifconfig_bxe2="up" > ifconfig_bxe3="up" > cloned_interfaces="lagg0" > ifconfig_lagg0="laggproto lacp laggport bxe2 laggport bxe3 129.242.3.9 > netmask > 255.255.255.192" > > > ifconfig lagg0 > lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether ..... > inet 129.242.3.9 netmask 0xffffffc0 broadcast 129.242.3.63 > nd options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect > status: active > groups: lagg > laggproto lacp lagghash l2,l3,l4 > laggport: bge2 flags=0<> > laggport: bge3 flags=0<> > > > As you can see the laggport flags are empty where I would expect > flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> > No error messages. The interfaces work ok if I drop using lagg. > > The same configuration has survived the upgrade on boxes using bge > > > Any ideas?
Why does lagg0 refer to bge2 and bge3 in the ifconfig output, and not to bxe2 and bxe3? -- +-------------------------------+------------------------------------+ | Vennlig hilsen, | Best regards, | | Trond Endrestøl, | Trond Endrestøl, | | IT-ansvarlig, | System administrator, | | Fagskolen Innlandet, | Gjøvik Technical College, Norway, | | tlf. mob. 952 62 567, | Cellular...: +47 952 62 567, | | sentralbord 61 14 54 00. | Switchboard: +47 61 14 54 00. | +-------------------------------+------------------------------------+ _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
