One detail I forgot: this is FreeBSD pughole.karels.net 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016 r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
> I recently upgraded my main FreeBSD machine, and bought a cheap Rosewill > PCI-e dual UART card to replace the old PCI card. I'm having problems > getting anything to work, though, as programs like tip hang when doing a > TIOCSETAW to set parameters; ^T says "ttyout" as the wchan. I have a > modem attached to one port, an antique serial device on the other; they > act the same. Has anyone seen this, or figured out how to get past it? > Some Googling hasn't yielded any recent results. > The details: > dmesg: > puc0: <Oxford Semiconductor OXPCIe952 UARTs> mem > 0xf9600000-0xf9603fff,0xf9400000-0xf95fffff,0xf9200000-0xf93fffff irq 16 at > device 0.0 numa-domain 0 on pci10 > puc0: 2 UARTs detected > uart2: <16950 or compatible> at port 1 on puc0 > uart3: <16950 or compatible> at port 2 on puc0 > pciconf -l: > puc0@pci0:112:0:0: class=0x070002 card=0xc1581415 chip=0xc1581415 > rev=0x00 hdr=0x00 > pstat -t while hanging: > $ pstat -t > LINE INQ CAN LIN LOW OUTQ USE LOW COL SESS PGID STATE > ttyu2 0 0 0 0 0 0 0 17 0 0 IC > ttyu3 1920 0 0 192 1984 0 199 17 0 0 ICOo > Thanks in advance, > Mike _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
