On 2016-Nov-7, at 1:16 PM, Brad Davis <b...@freebsd.org> wrote: > On Mon, Nov 07, 2016 at 12:19:24PM -0800, Mark Millard wrote: >> It looks like http://pkg.freebsd.org is still back as of head being >> 11-CURRENT: http://pkg.freebsd.org shows only > > Correct. I wrote up some details on how to use the 11 packages here: > > http://www.raspbsd.org/raspberrypi.html > > > Regards, > Brad Davis
Thanks. That helped me get to the next issue to figure out. I eventually found that https://wiki.freebsd.org/arm64/rpi3 has a "Package Repo" section with the alternate ABI information for pkg and also how to get port builds going (putting an ld in place) --as if the material was RPI3 specific. https://wiki.freebsd.org/arm64/rpi3 says: > There is no package repo for 12-CURRENT, but the package repo for 11 can be > used on 12-CURRENT by telling pkg to use the FreeBSD 11 aarch64 ABI: > > env ABI=FreeBSD:11:aarch64 pkg bootstrap > > Once pkg is bootstrapped, you can add this to /usr/local/etc/pkg.conf: > > ABI = "FreeBSD:11:aarch64"; > > If you want to build your own ports or packages, you'll need to install the > aarch64-binutils package and link /usr/bin/ld to > /usr/local/bin/aarch64-freebsd-ld: > > # pkg install aarch64-binutils > # ln /usr/local/bin/aarch64-freebsd-ld /usr/bin/ld > > Note that if you're building directly on the RPI3, you will definitely want > to use either USB storage or NFS. Building on the sdcard will likely wear the > sdcard out. (I have the root filesystem on a USB SSD.) My context is a Pine64+ 2GB --which https://wiki.freebsd.org/arm64 does not even mention as covered by TARGET_ARCH=aarch64 . But crochet is set up for pine64's and uses TARGET_ARCH=aarch64 style builds. === Mark Millard markmi at dsl-only.net _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
