Hi, all,
we are repeatedly bitten by the following misbehaviour of boot0cfg:
root@hd45:/usr/local # boot0cfg -s 1 mirror/m0
root@hd45:/usr/local # boot0cfg -v mirror/m0
# flag start chs type end chs offset size
1 0x80 1: 0: 1 0xa5 1022:254:63 16065 16418430
2 0x00 1023: 0: 1 0xa5 1020:254:63 16434495 16418430
3 0x00 1021: 0: 1 0xa5 768:254:63 32852925 1920667140
version=1.0 drive=0x80 mask=0xf ticks=182 bell= (0x7)
options=packet,update,nosetdrv
default_selection=F2 (Slice 2)
So, while it should have set the default to slice 1, it simply didn't.
gpart on the other hand works as expected:
root@hd45:/usr/local # gpart set -a active -i 1 mirror/m0
active set on mirror/m0s1
root@hd45:/usr/local # gpart show mirror/m0
=> 63 1953525104 mirror/m0 MBR (932G)
63 16002 - free - (7.8M)
16065 16418430 1 freebsd [active] (7.8G)
16434495 16418430 2 freebsd (7.8G)
32852925 1920667140 3 freebsd (916G)
1953520065 5102 - free - (2.5M)
But the "active" flag alone is not enough to convince boot0 to actually boot
that partition.
Additional info:
root@hd45:/usr/local # uname -a
FreeBSD hd45.hosting.punkt.de 10.3-RELEASE-p10 FreeBSD 10.3-RELEASE-p10 #0
r306942: Mon Oct 10 10:29:14 UTC 2016
root@:/usr/obj/nanobsd.hosting/usr/src/sys/GENERIC amd64
root@hd45:/usr/local # gmirror status
Name Status Components
mirror/m0 COMPLETE ada0 (ACTIVE)
ada1 (ACTIVE)
The only way to actually switch the boot0 default selection is:
root@hd45:/usr/local # sysctl kern.geom.debugflags=16
kern.geom.debugflags: 0 -> 16
root@hd45:/usr/local # boot0cfg -s 1 ada0
root@hd45:/usr/local # boot0cfg -s 1 ada1
root@hd45:/usr/local # boot0cfg -v mirror/m0
# flag start chs type end chs offset size
1 0x80 1: 0: 1 0xa5 1022:254:63 16065 16418430
2 0x00 1023: 0: 1 0xa5 1020:254:63 16434495 16418430
3 0x00 1021: 0: 1 0xa5 768:254:63 32852925 1920667140
version=1.0 drive=0x80 mask=0xf ticks=182 bell= (0x7)
options=packet,update,nosetdrv
default_selection=F1 (Slice 1)
Any hints what's going on, here? Obviously it is possible to manipulate
the MBR of a gmirror device - as gpart proves. The boot0cfg pops up
since FreeBSD 8 when we started using a mirrored NanoBSD setup.
Thanks and kind regards,
Patrick
--
punkt.de GmbH * Kaiserallee 13a * 76133 Karlsruhe
Tel. 0721 9109 0 * Fax 0721 9109 100
i...@punkt.de http://www.punkt.de
Gf: Jürgen Egeling AG Mannheim 108285
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
