Hi,
I'm having trouble with the isci driver in both stable and current. I
see the following dmesg in stable:
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port
0x5000-0x50ff mem 0xe7afc000-0xe7afffff,0xe7400000-0xe77fffff irq 19
at device 0.0 on pci11
isci: 1:000051 ISCI bus_alloc_resource failed
I'm running FreeBSD on VMWare ESXi 6 with vt-d passthrough of the isci
devices, here is the relevant pciconf output:
none2@pci0:3:0:0: class=0x0c0500 card=0x062815d9 chip=0x1d708086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'C600/X79 series chipset SMBus Controller 0'
class = serial bus
subclass = SMBus
cap 10[90] = PCI-Express 2 endpoint max data 128(128) link x32(x32)
speed 5.0(5.0) ASPM disabled(L0s)
cap 01[cc] = powerspec 3 supports D0 D3 current D0
cap 05[d4] = MSI supports 1 message
ecap 000e[100] = ARI 1
isci0@pci0:11:0:0: class=0x010700 card=0x062815d9 chip=0x1d6b8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'C602 chipset 4-Port SATA Storage Control Unit'
class = mass storage
subclass = SAS
cap 01[98] = powerspec 3 supports D0 D3 current D0
cap 10[c4] = PCI-Express 2 endpoint max data 128(128) link x32(x32)
speed 5.0(5.0) ASPM disabled(L0s)
cap 11[a0] = MSI-X supports 2 messages
Table in map 0x10[0x2000], PBA in map 0x10[0x3000]
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 000e[138] = ARI 1
ecap 0017[180] = TPH Requester 1
ecap 0010[140] = SRIOV 1
I haven't tried booting on bare metal but running a linux distro
(centos 7) in the same VM works without issue. Is is possible the
SRIOV option is causing trouble? I don't see a BIOS option to disable
that setting on this server like I have on some others. Any other
ideas to get this working?
Thanks,
Brad
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
