Matthew Seaman wrote:
> On 07/24/15 07:58, Holm Tiffe wrote:
> > ..interrestingly people here seem to focus my problem to ZFS.. but my
> > problem was to build an raid over 4 disks on my old i386 machine and that
> > failed with 2 different approaches.
> >
> > I'm accepting that ZFS is a too big thing for the i386 architecture
> > and I possibly should leave it alone on that machine.
> >
> > But my 2nd try with gvinum failed also ...why?
>
> I've had success using a combination of gstripe and gmirror to create a
> RAID10 over 4 drives:
>
> % gstripe status
> Name Status Components
> stripe/st0 UP mirror/gm2
> mirror/gm1
> % gmirror status
> Name Status Components
> mirror/gm2 COMPLETE da0 (ACTIVE)
> da1 (ACTIVE)
> mirror/gm1 COMPLETE da2 (ACTIVE)
> da3 (ACTIVE)
>
> This is a separate data area though -- system boots from some different
> drives. I can't remember if it is possible to boot from a gstripe.
>
> Cheers,
>
> Matthew
>
gmirror is working for me too (as I already described), I've talking about
gvinum here.., that's different.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, i...@tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
