What does 'sysctl kern.vty' say? If it is not 'vt', you need the following
stuff.
/boot/loader.conf should contain
kern.vty="vt"
And /etc/rc.conf
kld_list="radeonkms"
Or something similar.
FreeBSD is in the transition of old-style syscons- and vt-terminal. The
last one has support for modern KMS graphics, but is not the default on 10
yet.
Regards,
Ronald.
On Tue, 16 Jun 2015 18:55:10 +0200, Richard Kuhns <r...@wintek.com> wrote:
Greetings all,
I've just received a new Dell Precision 7810. I've installed FreeBSD
10.1 (UEFI boot), checked out sources, built world & kernel and am now
running r284449. So far, so good.
The problem is Xorg. I'm running the latest Xorg in ports; I just did a
'make install clean' in /usr/ports/x11/xorg with no errors.
The display card is a FirePro W4100. lspci shows:
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Cape Verde GL [FirePro W4100]
It has 4 DisplayPorts, and I have 2 monitors plugged in. If I run 'Xorg
-configure' it says
Number of created screens does not match number of detected devices.
Configuration failed.
Looking through /var/log/Xorg.0.log it appears that the X server is
trying to use the RADEON driver, but ends with:
=====
[ 1292.463] (--) Using syscons driver with X support (version 2.0)
[ 1292.463] (--) using VT number 9
[ 1292.485] (II) [KMS] Kernel modesetting enabled.
[ 1292.485] (WW) Falling back to old probe method for vesa
[ 1292.485] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 1292.485] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 1292.485] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 1292.485] (==) RADEON(0): Default visual is TrueColor
[ 1292.485] (==) RADEON(0): RGB weight 888
[ 1292.485] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 1292.485] (--) RADEON(0): Chipset: "VERDE" (ChipID = 0x682c)
[ 1292.579] (EE) RADEON(0): [drm] Failed to open DRM device for
pci:0000:03:00.0: No such file or directory
[ 1292.579] (EE) RADEON(0): Kernel modesetting setup failed
[ 1292.579] (II) UnloadModule: "radeon"
[ 1292.579] (EE) Screen(s) found, but none have a usable configuration.
[ 1292.579] (EE)
Fatal server error:
[ 1292.579] (EE) no screens found(EE)
[ 1292.580] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1292.580] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 1292.580] (EE)
[ 1292.580] (EE) Server terminated with error (1). Closing log file.
====
Should I be able to use this video card? I've done some googling, and
apparently at least some Linux people are using it.
It's not a huge deal if it doesn't work; I can install a Radeon HD 4670
that I know works. If I've mis-configured something, though, I'd like to
fix it.
Thanks for any comments!
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
