On Mon, Sep 23, 2013 at 8:30 PM, Harald Schmalzbauer < h.schmalzba...@omnilan.de> wrote:
> Bezüglich Amitabh Kant's Nachricht vom 21.09.2013 03:24 (localtime): > > On Thu, Sep 19, 2013 at 7:35 PM, Harald Schmalzbauer > > <h.schmalzba...@omnilan.de <mailto:h.schmalzba...@omnilan.de>> wrote: > > > > Hello, > > > > unloading the kernel module of dahdi-kmod26-2.6.1.r10738 leads to > this > > panic: > > > > > > <snip> > > > > wcb4xxp0: <6>Did not do the highestorder stuff > > <6>dahdi: Detected time shift. > > <5>dahdi_echocan_mg2: Registered echo canceler 'MG2' > > > > Starting asterisk afterwards also leads to panic. > > I guess dahdi development stalled, but I wanted to try it because I'd > > prefer freeswitch and need BRI support... > > Is somebody familiar with dahdi and interested in making it work with > > FreeBSD 9.2? > > > > Thanks, > > > > -Harry (not subscribed to isdn@) > > > > > > > > Have you been able to solve the problem? I am running Freeswitch (from > > git, not port) and dahdi/dahdi-kmod26 (from port) with PRI line > > (Digium 8 span and single span) without any problems on 9.1. Will test > > it on 9.2 and get back to you if I see a panic . > Hello Amitabh, > > couldn't solve my problem. > First, dahdi_scan doesn't detect ports jumpered to NT mode. I need 2 ports > in NT mode, so trying anything else with dahdi before my settings get > correctly recognized is probably not worth the time. > Also I have to investigate if it is still true that libpri doesn't support > ptmp in NT mode!?! > In general, the freebsd dahdi port doesn't seem to be in good shape; > Couldn't find any docs about sysctls (dahdi.wcb4xxp.teignorered, '-d' shows > nothing :-( ), no man page – hard to find out anything about dahdi in > FreeBSD, not even the supported hardwhere seems to be documentend > anywhere... > > Any hints highly appreciated, although I think the better way was to teach > FreeTDM speaking CAPI. HPS does a great job keeping all kind of ISDN > hardware supported by i4b (ISDN4BSD)! > Or to make chan_capi work with asterisk11 – the lesser evil than fighting > dahid... > > Thanks, > > -Harry > > > Hello Harry Sadly, there is not much help while installing/using dahdi on FreeBSD. There does not seem to by any sysctls defined for dahdi which are needed to set for certain cards. Infact, for the 8 span card, to change the default T1 to E1, I had to make changes in the code directly. Amitabh _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
