On Tue, Sep 3, 2013 at 3:24 PM, Daniel Braniss <da...@cs.huji.ac.il> wrote:
> hi, > I have a hard time figuring this out, the kernel says: > ... > ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port > 0xecc0-0xecdf mem 0xd9e80000-0xd9efffff,0xd9ff8000-0xd9ffbfff irq 40 at > device > 0.0 on pci4 > CI Express Bus: Speed 5.0GT/s Width x8 > ... > > pciconf says: > ix0@pci0:4:0:0: class=0x020000 card=0x7a118086 chip=0x10fb8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82599EB 10-Gigabit SFI/SFP+ Network Connection' > class = network > subclass = ethernet > > but both manuals ixgb and ixgbe mention a different chip, and device > man for ixb says: > ... > ixgb - Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating > sys- > tem > ... > The ixgb driver provides support for PCI Gigabit Ethernet adapters > based > on the Intel 82597EX Ethernet controller chips. The driver supports > > man for ixgbe says: > ... > ixgbe - Intel(R) 10Gb Ethernet driver for the FreeBSD operating system > ... > the Intel 82598EB > ... > > to make things even more confusing, Dell says: > DELL INTEL X520 DA2 10GBe DP+SERVER ADAPTER PCIE > > > and finally, there is no man ix > > 'will the real ix please stand up?' > danny > > > this is the ixgbe driver. The one that works with netmap :) cheers luigi _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
