sysinstall had the ability to allow you to muck with /etc/ttys before rebooting to your installed OS.
This functionality is coming back slowly. In 9.2-R you will be able to (somehow) bow out of the installation process after it's complete (e.g., "Ctrl-C" ??) and then run bsdconfig -- invoking the "TTYs" module, giving you a chance to change the settings before you reboot from your newly installed system. Tighter Integration will follow in the years to come... but replacing a tool that had a 15-year run which did _all_ of this stuff, is/was not an overnight project. Rather, it's a journey! -- Devin On Aug 12, 2013, at 5:56 AM, Michael Sierchio wrote: > You need to change /etc/ttys to turn off the virtual consoles and turn > on a serial terminal. > E.g., > > ttyv0 "/usr/libexec/getty Pc" xterm off secure > # Virtual terminals > ttyv1 "/usr/libexec/getty Pc" xterm off secure > ttyv2 "/usr/libexec/getty Pc" xterm off secure > ttyv3 "/usr/libexec/getty Pc" xterm off secure > ttyv4 "/usr/libexec/getty Pc" xterm off secure > ttyv5 "/usr/libexec/getty Pc" xterm off secure > ttyv6 "/usr/libexec/getty Pc" xterm off secure > ttyv7 "/usr/libexec/getty Pc" xterm off secure > ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure > # Serial terminals > # The 'dialup' keyword identifies dialin lines to login, fingerd etc. > ttyu0 "/usr/libexec/getty std.9600" dialup on secure > ttyu1 "/usr/libexec/getty std.9600" dialup off secure > ttyu2 "/usr/libexec/getty std.9600" dialup off secure > ttyu3 "/usr/libexec/getty std.9600" dialup off secure > # Dumb console > dcons "/usr/libexec/getty std.9600" vt100 off secure > > On Mon, Aug 12, 2013 at 8:34 AM, CeDeROM <cede...@tlen.pl> wrote: >> Hello :-) >> >> With my friend Jacek we have tried to perform PXE installation of >> FreeBSD 9 on an i386 embedded system for one project. This required >> adding "-h" or "comconsole" to the /boot/loader.conf so the >> input-output is done with serial console port, not video console. >> However, after installation, on this embedded system with no video >> console, system seems to be configured to use videoconsole by >> default... >> >> Is it possible to add this nice feature to the new installer that >> would recognise if installation is done with serial-port-console and >> then setup the installed system to work with serial-port-console by >> default not the videoconsole? We could try it out on 9.2-RC2 if >> possible :-) >> >> Best regards! :-) >> Tomek >> >> -- >> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info >> _______________________________________________ >> freebsd-embed...@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded >> To unsubscribe, send any mail to "freebsd-embedded-unsubscr...@freebsd.org" > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" _____________ The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
