I had a sparc64 (Netra X1) running a stable/9 from late March 2013.
Actually, the kernel may've been a bit newer than that as I was working with
folks to diagnose and repair some Netra-X1 specific issues. But, ZFS worked
fine. I have two pools, zroot as a RAID1 (using equally sized partitions at
the front of two large disks), and a zdata that is a large pool of the
remaining space of both disks concatenated together.
After installing a kernel from a build of [yesterday's] stable/9 today, I now
get a failure when trying to boot, which can be seen at the end of this clip
from the end of the boot messages below.
Is anyone aware of a change in recent months that might've caused this, or
have any idea what I may've done wrong? In google'ing I've seen a few posts
talking about ways to import the zfs pool to adjust the cache file, but I'm not
sure if that is or isn't my problem. I don't think I did anything specific
with configuring cache files for either pool.
Thoughts are welcome. I don't have physical access to the machine for quite
a few more hours, but when I do should be able to net-boot into the earlier
freebsd stable/9 that I originally installed onto this host, and can try a few
more things.
- Chris
atapci0: <AcerLabs M5229 UDMA66 controller> port
0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x1022f
at device 13.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access
bug, expect reduced performance
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounter "tick" frequency 500000000 Hz quality 1000
Event timer "tick" frequency 500000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
Root mount waiting for: usbus0
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
Trying to mount root from zfs:zroot []...
Mounting from zfs:zroot failed with error 2.
Loader variables:
vfs.root.mountfrom=zfs:zroot
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
