Hello Adrian
On 29.04.2013 19:51, Adrian Chadd wrote:
Hm, can you double check the port configuration? is it somehow getting
the number of stop bits wrong or something? What about flow control?
I did not change anything, I even did not set anything special
back with FreeBSD 7.4 during the setup of ntpd for the DCF77
mouseCLOCK.
Here the settings of the serial (sorry for the line wrapping):
root@superman:~ # stty -a -f /dev/refclock-0
speed 50 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
-echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
-nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel
-ignbrk
-brkint -inpck ignpar -parmrk
oflags: -opost -onlcr -ocrnl tab0 -onocr -onlret
cflags: cread cs8 -parenb -parodd -hupcl clocal -cstopb -crtscts
-dsrflow
-dtrflow -mdmbuf
cchars: discard = <undef>; dsusp = <undef>; eof = <undef>; eol =
<undef>;
eol2 = <undef>; erase = <undef>; erase2 = <undef>;
intr = <undef>; kill = <undef>; lnext = <undef>; min = 1;
quit = <undef>; reprint = <undef>; start = <undef>;
status = <undef>; stop = <undef>; susp = <undef>; time = 0;
werase = <undef>;
root@superman:~ # ls -l /dev/refclock-0
lrwxr-xr-x 1 root wheel 5 Apr 29 17:05 /dev/refclock-0@ -> cuau1
root@superman:~ #
Are there overflow/underflow counters with the uart driver? I wonder
if you're hitting issues there.
Is there anything I can do to debug?
PS: No need to use "reply all", reply only to the list is
perfect, as I do filter e-mails based on the "List-Id" header line.
bye
Fabian
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
