Hi Adrian,
Thanks for your help. :)
My mpd.conf:
============
startup:
# configure mpd users
#set user foo bar admin
set user suporte papatango
set user admin tutumineiro admin
# configure the console
set console self 192.168.8.34 5005
set console open
# configure the web server
set web self 0.0.0.0 5006
set web open
default:
load pppoe_server
pppoe_server:
create bundle template B
set iface disable proxy-arp
set iface enable tcpmssfix
set ipcp dns 8.8.8.8 8.8.4.4
#set ipcp enable vjcomp
set iface up-script /usr/local/etc/mpd5/addclient.sh
set iface down-script /usr/local/etc/mpd5/removeclient.sh
set ippool add pool1 10.10.0.1 10.10.255.254
set ipcp ranges 10.51.0.1/32 ippool pool1
create link template common pppoe
#set link enable multilink
set link action bundle B
set link disable chap pap eap
set link mtu 1492
set link mru 1492
set link enable pap
load radius
create link template igb1 common
set pppoe iface igb1
set pppoe acname "IntBSD1"
set pppoe service "*"
set link enable incoming
set auth max-logins 1
set link max-children 5000
create link template igb2 common
set pppoe iface igb2
set pppoe acname "IntBSD2"
set pppoe service "*"
set link enable incoming
set auth max-logins 1
set link max-children 5000
create link template igb3 common
set pppoe iface igb3
set pppoe acname "IntBSD3"
set pppoe service "*"
set link enable incoming
set auth max-logins 1
set link max-children 5000
radius:
set radius server localhost xuxupedra 1812 1813
set radius retries 3
set radius timeout 3
# send the given IP in the RAD_NAS_IP_ADDRESS attribute to the server.
set radius me 127.0.0.1
# send accounting updates every 5 minutes
set auth acct-update 300
# enable RADIUS, and fallback to mpd.secret, if RADIUS auth failed
set auth enable radius-auth
# enable RADIUS accounting
set auth enable radius-acct
# protect our requests with the message-authenticator
set radius enable message-authentic
My ppp.conf:
intnet:
set device PPPoE:re0
set mru 1492
set mtu 1492
set authname hercilia201254
set authkey 12345
set login
set dial
enable dns
add default HISADDR
set timeout 0
open
The test server is off now, but I'll get ipfw and dummynet settings in
the Companyand post it here.
Em 20/04/13 11:48, Adrian Chadd escreveu:
Can you provide more information about the configuration of mpd and ppp?
the panic is in the dummynet code; can you provide information about
your ipfw/dummynet setup?
Thanks,
adrian
On 20 April 2013 06:21, Marcelo Gondim <gon...@bsdinfo.com.br> wrote:
Hi all,
I'm doing tests with mpdas pppoeserver. Tried to simulate an attack of 1000
connections using an incorrect login and after a certain time can cause a
kernel panic in the system. Below the panicgenerated:
http://pastebin.com/nUXGVR3y
Other equipment I do:
# for (( i=0; i < 1000; i++ )); do ppp -ddial intnet ; done
My System:
Intel Motherboard Server S5500BC with Dual Processor Xeon(R) CPU E5606 @
2.13GHz
8Gb ram
I do not understand programming in Cor Assembly. But could someone tell me
if what happened was a system problem or hardware?
Best regards,
Gondim
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
--
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
