I have lost one of my CDROM drives (HL-DT-STDVD-RAM GH22LP20/2.00)
after going from 7.4 to 9.1 when using ATA_CAM. It is attached to
a Promise PDC20268 UDMA100 controller. A standard harddisk drive
attached to this controller works well. Cables, controller and drive
where replaced already.
Kernel gives me:
atapci1: <Promise PDC20268 UDMA100 controller> port
0xb000-0xb007,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9800-0x980f mem
0xdf800000-0xdf803fff irq 11 at device 12.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
...
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <Maxtor 7B300R0 BAH41G10> ATA-7 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
...
(cd2:ata3:0:0:0): got CAM status 0x50
(cd2:ata3:0:0:0): fatal error, failed to attach to device
(cd2:ata3:0:0:0): lost device, 4 refs
(cd2:ata3:0:0:0): removing device entry
...
Attaching the CDROM drive to the controller that is integrated on
the mainboard (Intel PIIX4 UDMA33 controller) does not show this
problem (but here I don't have UDMA66).
It also works when not using ATA_CAM:
...
acd0: DVDR <HL-DT-STDVD-RAM GH22LP20/2.00> at ata3-master UDMA66
...
So this semes to be a problem with the Promise controller and ATA_CAM.
Any ideas? Or should I file PR?
Thanks,
-Andre
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
