On Wed, 6 Feb 2013 14:02:44 +0100 Jens Jahnke <jan0...@gmx.net> wrote:
JJ> On Wed, 06 Feb 2013 14:40:47 +0200 JJ> Andriy Gapon <a...@freebsd.org> wrote: JJ> JJ> AG> "error 6" is ENXIO, which usually corresponds to a disappearing JJ> AG> device or some such. Do you get anything in logs (or other JJ> AG> objective experience) that could look like that? JJ> JJ> Nothing found so far. System ran stable for the last 18 hours JJ> through. JJ> JJ> I'll look if the error occurs again. It seems that the error is somewhat hardware or bios related. If the machine has been powered off for at least some hours the error occurs on the first boot. It reoccurs if the machine is reset but does not if the machine is powered off and powered on again after a minute. If I set the board controller to ide mode everything is fine but my ssd is not recognized. Another option that seems to work is powering on the machine enter bios and let it run for some minutes. Afterwards I can boot without errors. So maybe the controller needs I "warmup phase". ;) Anyway, I can live with that and thanks for all your answers. Regards, Jens -- 09. Hornung 2013, 09:08 Homepage : http://www.jan0sch.de Fremen add life to spice!
pgpL7S29yDWtj.pgp
Description: PGP signature
