On Thu, Nov 22, 2012 at 10:49:21AM +0900, YongHyeon PYUN wrote:
> On Wed, Nov 21, 2012 at 02:59:34PM -0500, Richard Kuhns wrote:
> > On 11/20/12 03:52, YongHyeon PYUN wrote:
> > > On Fri, Nov 16, 2012 at 10:30:04AM -0500, Richard Kuhns wrote:
> > >> Hi all,
> > >>
> > >> Over the last month or so I've installed FreeBSD 9 (-stable) on several
> > >> Mac
> > >> Minis via the memstick image; they seem to be pretty good little boxes
> > >> for
> > >> things like offsite secondary nameservers, for example, and they're
> > >> easily
> > >> replaced in case of problems.
> > >>
> > >> However, the newest minis have slightly different hardware, and FreeBSD
> > >> can't
> > >> find the built-in NIC. pciconf -lv on the new mini shows it as
> > >>
> > >> none3@pci0:1:0:0: class=0x020000 card=0x168614e4 chip=0x168614e4
> > >> rev=0x01
> > >
> > > It seems this controller is BCM57766.
> > >
> > >> hdr=0x00
> > >> vendor = 'Broadcom Corporation'
> > >> class = network
> > >> subclass = ethernet
> > >>
> > >> The previous edition mini (that works) reports
> > >>
> > >> bge0@pci0:2:0:0: class=0x020000 card=0x16b414e4 chip=0x16b414e4 rev=0x10
> > >> hdr=0x00
> > >> vendor = 'Broadcom Corporation'
> > >> device = 'NetXtreme BCM57765 Gigabit Ethernet PCIe'
> > >> class = network
> > >> subclass = ethernet
> > >>
> > >> Is there a chance that adding the new card/chip info to the current
> > >> driver would
> > >> allow it to work? I'll be happy to test and report back. I'm afraid I'm
> > >> not
> > >> familiar enough with hardware at that level to figure out the patch
> > >> myself.
> > >>
> > >
> > > Try attached patch and let me know whether the patch works or not.
> > > If the patch works please share dmesg output(bge(4) and brgphy(4)
> > > output only).
> > > Note, the patch was generated against CURRENT.
> > >
> >
> > I'm afraid it didn't help. I ended up grabbing if_bge.c and if_bgereg.h from
>
> I guess you also need to copy brgphy.c from HEAD to
> /usr/src/sys/dev/mii directory.
>
> > HEAD using svnweb.freebsd.org. The patch installed cleanly and there were no
> > errors during the build, but still no NIC.
>
> Does it mean you're not seeing bge0 interface? Or you can't pass
> any traffic via bge0?
Oops, it seems I've not included your device ID in the diff.
Try attach one instead. Make sure you use brgphy.c from HEAD.
Index: sys/dev/bge/if_bgereg.h
===================================================================
--- sys/dev/bge/if_bgereg.h (revision 243366)
+++ sys/dev/bge/if_bgereg.h (working copy)
@@ -360,6 +360,7 @@
#define BGE_ASICREV_BCM5784 0x5784
#define BGE_ASICREV_BCM5785 0x5785
#define BGE_ASICREV_BCM57765 0x57785
+#define BGE_ASICREV_BCM57766 0x57766
#define BGE_ASICREV_BCM57780 0x57780
/* chip revisions */
@@ -2483,7 +2484,9 @@ struct bge_status_block {
#define BCOM_DEVICEID_BCM5906M 0x1713
#define BCOM_DEVICEID_BCM57760 0x1690
#define BCOM_DEVICEID_BCM57761 0x16B0
+#define BCOM_DEVICEID_BCM57762 0x1682
#define BCOM_DEVICEID_BCM57765 0x16B4
+#define BCOM_DEVICEID_BCM57766 0x1686
#define BCOM_DEVICEID_BCM57780 0x1692
#define BCOM_DEVICEID_BCM57781 0x16B1
#define BCOM_DEVICEID_BCM57785 0x16B5
@@ -2961,6 +2964,7 @@ struct bge_softc {
#define BGE_FLAG_5755_PLUS 0x00100000
#define BGE_FLAG_5788 0x00200000
#define BGE_FLAG_5717_PLUS 0x00400000
+#define BGE_FLAG_57765_PLUS 0x00800000
#define BGE_FLAG_40BIT_BUG 0x01000000
#define BGE_FLAG_4G_BNDRY_BUG 0x02000000
#define BGE_FLAG_RX_ALIGNBUG 0x04000000
Index: sys/dev/bge/if_bge.c
===================================================================
--- sys/dev/bge/if_bge.c (revision 243366)
+++ sys/dev/bge/if_bge.c (working copy)
@@ -216,7 +216,9 @@ static const struct bge_type {
{ BCOM_VENDORID, BCOM_DEVICEID_BCM5906M },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57760 },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57761 },
+ { BCOM_VENDORID, BCOM_DEVICEID_BCM57762 },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57765 },
+ { BCOM_VENDORID, BCOM_DEVICEID_BCM57766 },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57780 },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57781 },
{ BCOM_VENDORID, BCOM_DEVICEID_BCM57785 },
@@ -347,6 +349,7 @@ static const struct bge_revision bge_majorrevs[] =
{ BGE_ASICREV_BCM5787, "unknown BCM5754/5787" },
{ BGE_ASICREV_BCM5906, "unknown BCM5906" },
{ BGE_ASICREV_BCM57765, "unknown BCM57765" },
+ { BGE_ASICREV_BCM57766, "unknown BCM57766" },
{ BGE_ASICREV_BCM57780, "unknown BCM57780" },
{ BGE_ASICREV_BCM5717, "unknown BCM5717" },
{ BGE_ASICREV_BCM5719, "unknown BCM5719" },
@@ -362,6 +365,7 @@ static const struct bge_revision bge_majorrevs[] =
#define BGE_IS_575X_PLUS(sc) ((sc)->bge_flags &
BGE_FLAG_575X_PLUS)
#define BGE_IS_5755_PLUS(sc) ((sc)->bge_flags &
BGE_FLAG_5755_PLUS)
#define BGE_IS_5717_PLUS(sc) ((sc)->bge_flags &
BGE_FLAG_5717_PLUS)
+#define BGE_IS_57765_PLUS(sc) ((sc)->bge_flags &
BGE_FLAG_57765_PLUS)
const struct bge_revision * bge_lookup_rev(uint32_t);
const struct bge_vendor * bge_lookup_vendor(uint16_t);
@@ -2243,7 +2247,7 @@ bge_blockinit(struct bge_softc *sc)
} else if (!BGE_IS_5705_PLUS(sc))
limit = BGE_RX_RINGS_MAX;
else if (sc->bge_asicrev == BGE_ASICREV_BCM5755 ||
- sc->bge_asicrev == BGE_ASICREV_BCM57765)
+ BGE_IS_57765_PLUS(sc))
limit = 4;
else
limit = 1;
@@ -2658,6 +2662,7 @@ bge_probe(device_t dev)
break;
case BCOM_DEVICEID_BCM57761:
case BCOM_DEVICEID_BCM57765:
+ case BCOM_DEVICEID_BCM57766:
case BCOM_DEVICEID_BCM57781:
case BCOM_DEVICEID_BCM57785:
case BCOM_DEVICEID_BCM57791:
@@ -3321,10 +3326,13 @@ bge_attach(device_t dev)
/* Save chipset family. */
switch (sc->bge_asicrev) {
+ case BGE_ASICREV_BCM57765:
+ case BGE_ASICREV_BCM57766:
+ sc->bge_flags |= BGE_FLAG_57765_PLUS;
+ /* FALLTHROUGH */
case BGE_ASICREV_BCM5717:
case BGE_ASICREV_BCM5719:
case BGE_ASICREV_BCM5720:
- case BGE_ASICREV_BCM57765:
sc->bge_flags |= BGE_FLAG_5717_PLUS | BGE_FLAG_5755_PLUS |
BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS | BGE_FLAG_JUMBO |
BGE_FLAG_JUMBO_FRAME;
@@ -3738,12 +3746,9 @@ bge_attach(device_t dev)
sc->bge_phy_flags |= BGE_PHY_NO_3LED;
if ((BGE_IS_5705_PLUS(sc)) &&
sc->bge_asicrev != BGE_ASICREV_BCM5906 &&
- sc->bge_asicrev != BGE_ASICREV_BCM5717 &&
- sc->bge_asicrev != BGE_ASICREV_BCM5719 &&
- sc->bge_asicrev != BGE_ASICREV_BCM5720 &&
sc->bge_asicrev != BGE_ASICREV_BCM5785 &&
- sc->bge_asicrev != BGE_ASICREV_BCM57765 &&
- sc->bge_asicrev != BGE_ASICREV_BCM57780) {
+ sc->bge_asicrev != BGE_ASICREV_BCM57780 &&
+ !BGE_IS_5717_PLUS(sc)) {
if (sc->bge_asicrev == BGE_ASICREV_BCM5755 ||
sc->bge_asicrev == BGE_ASICREV_BCM5761 ||
sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
