On Mon, Sep 10, 2012 at 23:09:04 +0930, Benjamin Close wrote:
> Hi Folks,
> I've facing an intermittent hang with a USB port which seems cam
> related:
>
> Event's that happen are:
>
> o USB modem (HUAWEI E220) plugged into PC
>
> ugen3.2: <HUA WEI> at usbus3
> u3g0: <3G Modem> on usbus3
> u3g0: Found 3 ports.
> umass0: <USB MASS STORAGE> on usbus3
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:6:0:-1: Attached to scbus6
> umass1: <USB MASS STORAGE> on usbus3
> umass1: SCSI over Bulk-Only; quirks = 0x0000
> umass1:7:1:-1: Attached to scbus7
> cd1 at umass-sim0 bus 0 scbus6 target 0 lun 0
> cd1: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
> cd1: 1.000MB/s transfers
> cd1: Attempt to query device size failed: NOT READY, Medium not present
> da0 at umass-sim1 bus 1 scbus7 target 0 lun 0
> da0: <HUAWEI SD Storage 2.31> Removable Direct Access SCSI-2 device
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
>
>
> o Time Elapses....many packets passed, no da0 or cd1 used.
>
>
> o USB Modem drops off the bus
> (It does this occasionally as it resets itself)
>
> o Causes USB bus to lose devices
>
> ugen3.2: <HUA WEI> at usbus3 (disconnected)
> u3g0: at uhub3, port 1, addr 2 (disconnected)
> (cd1:umass-sim0:0:0:0): lost device, 1 refs
> (cd1:umass-sim0:0:0:0): removing device entry
> (pass4:umass-sim0:0:0:0): passdevgonecb: devfs entry is gone
> (da0:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs
> (da0:umass-sim1:1:0:0): removing device entry
> (pass5:umass-sim1:1:0:0): passdevgonecb: devfs entry is gone
> umass0: at uhub3, port 1, addr 2 (disconnected)
>
>
> At this point that particular USB port is effectively useless. Plugging
> anything into the ports shows no device showing up.
>
> Running usbconfig hangs with:
>
> PID TID COMM TDNAME KSTACK
> 48562 101874 usbconfig - mi_switch+0x186
> sleepq_wait+0x42 _sx_xlock_hard+0x426 usbd_enum_lock+0xac
> usb_ref_device+0x21c usb_open+0xc7 devfs_open+0x197 vn_open_cred+0x2ff
> kern_openat+0x20a amd64_syscall+0x540 Xfast_syscall+0xf7
>
> Controller is:
>
> uhci0@pci0:0:26:0: class=0x0c0300 card=0x02091028 chip=0x28348086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801H (ICH8 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci1@pci0:0:26:1: class=0x0c0300 card=0x02091028 chip=0x28358086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801H (ICH8 Family) USB UHCI Controller'
> class = serial bus
> subclass = USB
> ehci0@pci0:0:26:7: class=0x0c0320 card=0x02091028 chip=0x283a8086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801H (ICH8 Family) USB2 EHCI Controller'
> class = serial bus
> subclass = USB
>
> It does however seem related to cam as looking at the various threads
> for the usb hub I find:
>
> (kgdb) bt
> #0 sched_switch (td=0xfffffe0002650000, newtd=0xfffffe000227f000,
> flags=Variable "flags" is not available.
> ) at /usr/src/sys/kern/sched_ule.c:1927
> #1 0xffffffff808f34c6 in mi_switch (flags=260, newtd=0x0) at
> /usr/src/sys/kern/kern_synch.c:485
> #2 0xffffffff8092bfd2 in sleepq_wait (wchan=0xfffffe001ec2a900, pri=92)
> at /usr/src/sys/kern/subr_sleepqueue.c:623
> #3 0xffffffff808f3c69 in _sleep (ident=0xfffffe001ec2a900,
> lock=0xfffffe00371e9210, priority=Variable "priority" is not available.
> ) at /usr/src/sys/kern/kern_synch.c:250
> #4 0xffffffff802bea02 in cam_sim_free (sim=0xfffffe001ec2a900,
> free_devq=1) at /usr/src/sys/cam/cam_sim.c:112
> #5 0xffffffff8074f8ba in umass_detach (dev=Variable "dev" is not available.
> ) at /usr/src/sys/dev/usb/storage/umass.c:2183
> #6 0xffffffff8091a054 in device_detach (dev=0xfffffe001ec2e900) at
> device_if.h:214
> #7 0xffffffff8075c458 in usb_detach_device (udev=0xfffffe0007ce8800,
> iface_index=32 ' ', flag=Variable "flag" is not available.
> ) at /usr/src/sys/dev/usb/usb_device.c:1065
> #8 0xffffffff8075c5f4 in usb_unconfigure (udev=0xfffffe0007ce8800,
> flag=Variable "flag" is not available.
> ) at /usr/src/sys/dev/usb/usb_device.c:455
> #9 0xffffffff8075c88e in usb_free_device (udev=0xfffffe0007ce8800,
> flag=Variable "flag" is not available.
> ) at /usr/src/sys/dev/usb/usb_device.c:2093
> #10 0xffffffff80764e5e in uhub_explore (udev=0xfffffe0007353800) at
> /usr/src/sys/dev/usb/usb_hub.c:358
> #11 0xffffffff8074f536 in usb_bus_explore (pm=Variable "pm" is not
> available.
> ) at /usr/src/sys/dev/usb/controller/usb_controller.c:359
> #12 0xffffffff80769173 in usb_process (arg=Variable "arg" is not available.
> ) at /usr/src/sys/dev/usb/usb_process.c:170
> #13 0xffffffff808bc2df in fork_exit (callout=0xffffffff807690a0
> <usb_process>, arg=0xffffff80007c0e88, frame=0xffffff804743cc40) at
> /usr/src/sys/kern/kern_fork.c:992
> #14 0xffffffff80bc216e in fork_trampoline () at
> /usr/src/sys/amd64/amd64/exception.S:602
>
>
> From: cam_sim_free(struct cam_sim *sim, int free_devq)
>
> (kgdb) l
> 107 {
> 108 int error;
> 109
> 110 sim->refcount--;
> 111 if (sim->refcount > 0) {
>
> 112 error = msleep(sim, sim->mtx, PRIBIO, "simfree", 0);
>
> 113 KASSERT(error == 0, ("invalid error value for
> msleep(9)"));
> 114 }
> 115
> 116 KASSERT(sim->refcount == 0, ("sim->refcount == 0"));
>
>
> It almost appears as if the cam layer is trying to finalise a write of
> some sort but the physical device has already gone.
>
> (kgdb) p sim->refcount
> $1 = 1
>
> Not sure why refcount is still ==1.
>
> The same device in a box running 9.0-Stable (as of about 3 months ago)
> with a ICH9 controller works as expected.
>
> Any suggestions?
Do you happen to have 'camcontrol devlist -v' output for the above
scenario?
I have attached a patch for the pass(4) driver that might help things
somewhat. The pass(4) driver won't go away completely if there is a
context that has the driver open when the underlying device goes away.
That might be what is holding up the SIM refcount, although I'm not
certain.
Ken
--
Kenneth Merry
k...@freebsd.org
*** //depot/vendor/FreeBSD/stable/9/sys/cam/scsi/scsi_pass.c.orig
--- //depot/vendor/FreeBSD/stable/9/sys/cam/scsi/scsi_pass.c
***************
*** 76,81 ****
--- 76,82 ----
pass_flags flags;
u_int8_t pd_type;
union ccb saved_ccb;
+ int open_count;
struct devstat *device_stats;
struct cdev *dev;
struct cdev *alias_dev;
***************
*** 140,151 ****
static void
passdevgonecb(void *arg)
{
struct cam_periph *periph;
periph = (struct cam_periph *)arg;
! xpt_print(periph->path, "%s: devfs entry is gone\n", __func__);
! cam_periph_release(periph);
}
static void
--- 141,183 ----
static void
passdevgonecb(void *arg)
{
+ struct cam_sim *sim;
struct cam_periph *periph;
+ struct pass_softc *softc;
+ int i;
periph = (struct cam_periph *)arg;
+ sim = periph->sim;
+ softc = (struct pass_softc *)periph->softc;
+
+ KASSERT(softc->open_count >= 0, ("Negative open count %d",
+ softc->open_count));
+
+ mtx_lock(sim->mtx);
+
+ /*
+ * When we get this callback, we will get no more close calls from
+ * devfs. So if we have any dangling opens, we need to release the
+ * reference held for that particular context.
+ */
+ for (i = 0; i < softc->open_count; i++)
+ cam_periph_release_locked(periph);
+
+ softc->open_count = 0;
! /*
! * Release the reference held for the device node, it is gone now.
! */
! cam_periph_release_locked(periph);
!
! /*
! * We reference the SIM lock directly here, instead of using
! * cam_periph_unlock(). The reason is that the final call to
! * cam_periph_release_locked() above could result in the periph
! * getting freed. If that is the case, dereferencing the periph
! * with a cam_periph_unlock() call would cause a page fault.
! */
! mtx_unlock(sim->mtx);
}
static void
***************
*** 219,231 ****
}
cam_periph_unlock(periph);
physpath = malloc(MAXPATHLEN, M_DEVBUF, M_WAITOK);
if (xpt_getattr(physpath, MAXPATHLEN,
"GEOM::physpath", periph->path) == 0
&& strlen(physpath) != 0) {
make_dev_physpath_alias(MAKEDEV_WAITOK, &softc->alias_dev,
softc->dev, softc->alias_dev, physpath);
! }
free(physpath, M_DEVBUF);
/*
--- 251,268 ----
}
cam_periph_unlock(periph);
physpath = malloc(MAXPATHLEN, M_DEVBUF, M_WAITOK);
+
+ cam_periph_lock(periph);
if (xpt_getattr(physpath, MAXPATHLEN,
"GEOM::physpath", periph->path) == 0
&& strlen(physpath) != 0) {
+ cam_periph_unlock(periph);
make_dev_physpath_alias(MAKEDEV_WAITOK, &softc->alias_dev,
softc->dev, softc->alias_dev, physpath);
! } else
! cam_periph_unlock(periph);
!
free(physpath, M_DEVBUF);
/*
***************
*** 371,377 ****
if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
! mtx_lock(periph->sim->mtx);
return (CAM_REQ_CMP_ERR);
}
--- 408,414 ----
if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
xpt_print(periph->path, "%s: lost periph during "
"registration!\n", __func__);
! cam_periph_lock(periph);
return (CAM_REQ_CMP_ERR);
}
***************
*** 464,469 ****
--- 501,508 ----
return(EINVAL);
}
+ softc->open_count++;
+
cam_periph_unlock(periph);
return (error);
***************
*** 472,484 ****
static int
passclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct cam_periph *periph;
periph = (struct cam_periph *)dev->si_drv1;
if (periph == NULL)
return (ENXIO);
! cam_periph_release(periph);
return (0);
}
--- 511,546 ----
static int
passclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
+ struct cam_sim *sim;
struct cam_periph *periph;
+ struct pass_softc *softc;
periph = (struct cam_periph *)dev->si_drv1;
if (periph == NULL)
return (ENXIO);
! sim = periph->sim;
! softc = periph->softc;
!
! mtx_lock(sim->mtx);
!
! softc->open_count--;
!
! cam_periph_release_locked(periph);
!
! /*
! * We reference the SIM lock directly here, instead of using
! * cam_periph_unlock(). The reason is that the call to
! * cam_periph_release_locked() above could result in the periph
! * getting freed. If that is the case, dereferencing the periph
! * with a cam_periph_unlock() call would cause a page fault.
! *
! * cam_periph_release() avoids this problem using the same method,
! * but we're manually acquiring and dropping the lock here to
! * protect the open count and avoid another lock acquisition and
! * release.
! */
! mtx_unlock(sim->mtx);
return (0);
}
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
