Hi, Works fine for me with 9.0-p3 with the same controller, slight firmware differences:
mfi0: 2709 (boot + 4s/0x0020/info) - Firmware version 2.120.244-1482 mfi0: 2710 (boot + 5s/0x0020/info) - Package version 20.10.1-0077 mfi0: 2711 (boot + 5s/0x0020/info) - Board Revision 04A I will be trying out 9.1-BETA on a new batch of machines next week ... Regards, Jan. On 08/08/2012, at 7:25 AM, George Kontostanos <gkontos.m...@gmail.com> wrote: > Hi all, > > We have a server with a LSI 9240-4i controller configured in JBOD with > 4 SATA disks. Running FreeBSD 9.1-Beta1: > > Relevant dmesg: > > FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 > r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory = 17179869184 (16384 MB) > avail memory = 16471670784 (15708 MB) > ... > mfi0: <Drake Skinny> port 0xe000-0xe0ff mem > 0xf7a60000-0xf7a63fff,0xf7a00000-0xf7a3ffff irq 16 at device 0.0 on > pci1 > mfi0: Using MSI > mfi0: Megaraid SAS driver Ver 4.23 > ... > mfi0: 321 (397672301s/0x0020/info) - Shutdown command received from host > mfi0: 322 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0073/1000/9241/1000) > mfi0: 323 (boot + 3s/0x0020/info) - Firmware version 2.130.354-1664 > mfi0: 324 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0073/1000/9241/1000) > mfi0: 325 (boot + 3s/0x0020/info) - Firmware version 2.130.354-1664 > mfi0: 326 (boot + 5s/0x0020/info) - Package version 20.10.1-0107 > mfi0: 327 (boot + 5s/0x0020/info) - Board Revision 03A > mfi0: 328 (boot + 25s/0x0002/info) - Inserted: PD 04(e0xff/s3) > ... > mfisyspd0 on mfi0 > mfisyspd0: 1907729MB (3907029168 sectors) SYSPD volume > mfisyspd0: SYSPD volume attached > mfisyspd1 on mfi0 > mfisyspd1: 1907729MB (3907029168 sectors) SYSPD volume > mfisyspd1: SYSPD volume attached > mfisyspd2 on mfi0 > mfisyspd2: 1907729MB (3907029168 sectors) SYSPD volume > mfisyspd2: SYSPD volume attached > mfisyspd3 on mfi0 > mfisyspd3: 1907729MB (3907029168 sectors) SYSPD volume > mfisyspd3: SYSPD volume attached > ... > mfi0: 329 (boot + 25s/0x0002/info) - Inserted: PD 04(e0xff/s3) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=4433221100000000,0000000000000000 > mfi0: 330 (boot + 25s/0x0002/info) - Inserted: PD 05(e0xff/s1) > mfi0: 331 (boot + 25s/0x0002/info) - Inserted: PD 05(e0xff/s1) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=4433221102000000,0000000000000000 > mfi0: 332 (boot + 25s/0x0002/info) - Inserted: PD 06(e0xff/s2) > mfi0: 333 (boot + 25s/0x0002/info) - Inserted: PD 06(e0xff/s2) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=4433221101000000,0000000000000000 > mfi0: 334 (boot + 25s/0x0002/info) - Inserted: PD 07(e0xff/s0) > mfi0: 335 (boot + 25s/0x0002/info) - Inserted: PD 07(e0xff/s0) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=4433221103000000,0000000000000000 > mfi0: 336 (397672376s/0x0020/info) - Time established as 08/07/12 > 16:32:56; (28 seconds since power on) > > The problem: > > When trying to create a RaidZ pool using gpart and perform a 4K > alignment using gnop, we get the follwoing error immediately after > exporting the pool and destroying the .nop devices: > > id: 8043746387654554958 > state: FAULTED > status: One or more devices contains corrupted data. > action: The pool cannot be imported due to damaged devices or data. > The pool may be active on another system, but can be imported using > the '-f' flag. > see: http://illumos.org/msg/ZFS-8000-5E > config: > > Pool FAULTED corrupted data > raidz1-0 ONLINE > 13283347160590042564 UNAVAIL corrupted data > 16981727992215676534 UNAVAIL corrupted data > 6607570030658834339 UNAVAIL corrupted data > 3435463242860701988 UNAVAIL corrupted data > > When we use glabel for the same purpose with the combination of gnop, > the pool imports fine. > > Any suggestions? > > -- > George Kontostanos > Aicom telecoms ltd > http://www.aisecure.net > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
