On Fri, 15 Jun 2012, Ronald Klop wrote:
On Fri, 15 Jun 2012 08:01:21 +0200, Kevin Oberman <kob6...@gmail.com> wrote:
On Thu, Jun 14, 2012 at 3:11 AM, Ronald Klop
<ronald-freeb...@klop.yi.org> wrote:
On Thu, 14 Jun 2012 02:41:58 +0200, Kevin Oberman <kob6...@gmail.com>
wrote:
Since updating my systems to 9-Stable, I am not getting my smartcard
reader attached when hot-plugged.
From devd.conf
attach 50 {
device-name "ugen[0-9]+";
match "vendor" "0x0529";
match "product" "0x0600";
action "/usr/local/sbin/openct-control attach usb:529/600 usb
/dev/$dev$
};
detach 50 {
device-name "ugen[0-9]+";
match "vendor" "0x0529";
match "product" "0x0600";
action "/usr/bin/pkill -fx '/usr/local/sbin/ifdhandler -H -p
[a-z0-9]+ $
};
If I manually enter the "action" command, it works fine, but it fails
when I insert the device. It worked fine under version 8. I have
confirmed devd is seeing the device inserted just fine. the action
just does not seem to be carried out.
Any idea where I should look? I saw a couple of threads on current
from others seeing something similar, but could find no resolution.
I have seen a
Did you run devd with debug messages on? Options -D and -d are helpful.
If you do does devd match the right devd.conf sections and start the
action?
With debug i get:
Processing event '!system=USB subsystem=DEVICE type=ATTACH
ugen=ugen1.3 cdev=ugen1.3 vendor=0x0529 product=0x0600 devclass=0xff
devsubclass=0x00 sernum="" release=0x0100 mode=host port=1
parent=ugen1.2'
[long list of "Testing" entries, none of which 'vendor' matched]
Executing 'logger Unknown USB device: vendor 0x0529 product 0x0600 bus
uhub3'
So it looks like devd is not matching the vendor. But my devd.conf
file contains that vendor. I don't know exactly why it is not being
tested against. Nothing in the debug output gives me a clue and I
tried grepping for one of the tested vendor IDs in /etc/devd.conf and
/etc/devd/*.conf. Not found.
I am at a loss.
http://www.freebsd.org/releases/9.0R/errata.html
See point 3 under Open Issues.
Even with those changes, devd is not triggering on my scanner attach:
match "subsystem" "DEVICE";
match "type" "ATTACH";
match "cdev" "ugen[0-9]+.[0-9]+";
match "vendor" "0x04b8";
match "product" "0x010a";
action "echo HERE! $cdev > /tmp/zoot";
# devd -d -D -f /etc/devd/wb.conf
Processing event '!system=USB subsystem=DEVICE type=ATTACH ugen=ugen0.6
cdev=ugen0.6 vendor=0x04b8 product=0x010a devclass=0xff devsubclass=0xff
sernum="" release=0x0103 mode=host port=4 parent=ugen0.4'
Pushing table
setting system=USB
setting subsystem=DEVICE
setting type=ATTACH
setting ugen=ugen0.6
setting cdev=ugen0.6
setting vendor=0x04b8
setting product=0x010a
setting devclass=0xff
setting devsubclass=0xff
setting sernum=
setting release=0x0103
setting mode=host
setting port=4
setting parent=ugen0.4
Processing notify event
Testing system=USB against ^DEVFS
Testing system=USB against ^DEVFS
Popping table
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
