----- Original Message -----
From: "Dmitry Morozovsky" <ma...@rinet.ru>
To: <freebsd-stable@FreeBSD.org>
Cc: <m...@freebsd.org>
Sent: Sunday, March 18, 2012 4:10 PM
Subject: ahci hangs on Supermicro MicroCloud second channel
Dear colleagues,
I've start testing SuperMicro MicroCloud[1] to have high-density routers
cluster, and experiencing strange effects with disk subsystem:
- on stable/8, it does detect AHCI controller, but detects disks as non-ahci
ad*
- on stable/9, disks are shown as ada*, but disk on second channel has constant
read/write hangs, showing 100% load on few hundreds kBps in gstat.
disk controller is Intel C204 PCH:
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem
0xfa901000-0xfa9017ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 284 to local APIC 0 vector 81
ahci0: using IRQ 284 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports
ahci0: Caps2: APST
ahci0: EM Caps: ALHD XMT SMB LED
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device
pass0: Serial Number WD-WCAYUFH26175
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device
pass1: Serial Number WD-WCAYUFH32290
pass1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device
ada0: Serial Number WD-WCAYUFH26175
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
GEOM: new disk ada0
GEOM: new disk ada1
ada1: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device
ada1: Serial Number WD-WCAYUFH32290
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
Any hints?
[1] http://www.supermicro.nl/products/system/3U/5037/SYS-5037MC-H8TRF.cfm
We have quite a few of these running 8.2-RELEASE-p6 on AHCI with no
problems (kernel compiled with:- device ahci)
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem
0xfbc01000-0xfbc017ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1003FBYX-01Y7B0 01.01V01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Corsair Force 3 SSD 1.3> ATA-8 SATA 3.x device
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
Given this might be worth seeing if 8.2 on AHCI fixes the
hangs and hence its a regression in 9. If your running
generic you should be able to just add the following to
/boot/loader.conf
ahci_load="YES"
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmas...@multiplay.co.uk.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
