Wilco ! Anything else I could usefully add ? - H
On 3 March 2012 03:35, Adrian Chadd <adr...@freebsd.org> wrote: > Hi! > > You now officially have enough information to fill out a PR! Thankyou > so very much for finding out which particular commit/commits caused > this regression for you! > > http://www.freebsd.org/send-pr.html > > Would you mind doing this? :) > > Thanks! > > > Adrian > > On 2 March 2012 18:50, Harry Newton <h...@yewbarrow.net> wrote: >> John, investigations shew bug introduced between 2012.02.23.22.26.00 >> and 2012.02.23.22.26.30 in these files: >> >> Edit src/sys/dev/acpica/acpi.c >> Add delta 1.305.2.4 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_ec.c >> Add delta 1.95.2.2 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_hpet.c >> Add delta 1.38.2.2 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_timer.c >> Add delta 1.50.2.3 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpivar.h >> Add delta 1.125.2.4 2012.02.23.22.26.14 jkim >> >> More details below. Let me know if I can do anything else. - H >> >> * dmesg >> Table 'FACP' at 0x77fd0200 >> Table 'APIC' at 0x77fd0390 >> APIC: Found table at 0x77fd0390 >> APIC: Using the MADT enumerator. >> MADT: Found CPU APIC ID 0 ACPI ID 1: enabled >> SMP: Added CPU 0 (AP) >> MADT: Found CPU APIC ID 1 ACPI ID 2: enabled >> SMP: Added CPU 1 (AP) >> Copyright (c) 1992-2012 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 9.0-STABLE #19: Fri Mar 2 22:28:14 GMT 2012 >> t...@hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA amd64 >> WARNING: DIAGNOSTIC option enabled, expect reduced performance. >> Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff80b6f000. >> Calibrating TSC clock ... TSC clock: 2194794720 Hz >> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.79-MHz K8-class >> CPU) >> Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2 >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C >> MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=0x2001<SSE3,CX16> >> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> >> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> >> L1 2MB data TLB: 8 entries, fully associative >> L1 2MB instruction TLB: 8 entries, fully associative >> L1 4KB data TLB: 32 entries, fully associative >> L1 4KB instruction TLB: 32 entries, fully associative >> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative >> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way >> associative >> L2 2MB unified TLB: 0 entries, disabled/not present >> L2 4KB data TLB: 512 entries, 4-way associative >> L2 4KB instruction TLB: 512 entries, 4-way associative >> L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative >> real memory = 2147483648 (2048 MB) >> Physical memory chunk(s): >> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) >> 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) >> 0x0000000000b9e000 - 0x0000000074722fff, 1941458944 bytes (473989 pages) >> avail memory = 1926897664 (1837 MB) >> Event timer "LAPIC" quality 400 >> ACPI APIC Table: <030107 APIC1519> >> INTR: Adding local APIC 1 as a target >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 >> x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000 >> x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 >> x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 >> APIC: CPU 0 has ACPI ID 1 >> APIC: CPU 1 has ACPI ID 2 >> ULE: setup cpu 0 >> ULE: setup cpu 1 >> ACPI: RSDP 0xf96d0 00014 (v00 ACPIAM) >> ACPI: RSDT 0x77fd0000 00038 (v01 030107 RSDT1519 20070301 MSFT 00000097) >> ACPI: FACP 0x77fd0200 00084 (v02 030107 FACP1519 20070301 MSFT 00000097) >> ACPI: DSDT 0x77fd0430 044A0 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117) >> ACPI: FACS 0x77fde000 00040 >> ACPI: APIC 0x77fd0390 0005C (v01 030107 APIC1519 20070301 MSFT 00000097) >> ACPI: MCFG 0x77fd03f0 0003C (v01 030107 OEMMCFG 20070301 MSFT 00000097) >> ACPI: OEMB 0x77fde040 00071 (v01 030107 OEMB1519 20070301 MSFT 00000097) >> ACPI: HPET 0x77fd48d0 00038 (v01 030107 OEMHPET 20070301 MSFT 00000097) >> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 >> ioapic0: Routing external 8259A's -> intpin 0 >> MADT: Interrupt override: source 0, irq 2 >> ioapic0: Routing IRQ 0 -> intpin 2 >> MADT: Interrupt override: source 9, irq 9 >> ioapic0: intpin 9 trigger: level >> ioapic0: intpin 9 polarity: low >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> cpu0 BSP: >> ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 >> null: <null device, zero device> >> random: <entropy source, Software, Yarrow> >> io: <I/O> >> nfslock: pseudo-device >> kbd: new array size 4 >> kbd1 at kbdmux0 >> mem: <memory> >> acpi0: <030107 RSDT1519> on motherboard >> PCIe: Memory Mapped configuration base @ 0xe0000000 >> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >> ACPI: Executed 3 blocks of module-level executable AML code >> acpi0: Power Button (fixed) >> acpi0: reservation of fee00000, 1000 (3) failed >> acpi0: reservation of ffb80000, 80000 (3) failed >> acpi0: reservation of fff80000, 80000 (3) failed >> acpi0: reservation of 0, a0000 (3) failed >> acpi0: reservation of 100000, 77f00000 (3) failed >> ACPI timer: 1/1 1/2 0/3 1/2 1/2 1/2 1/3 1/2 1/2 1/2 -> 9 >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >> cpu0: <ACPI CPU> on acpi0 >> cpu0: switching to generic Cx mode >> cpu1: <ACPI CPU> on acpi0 >> pci_link0: Index IRQ Rtd Ref IRQs >> Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 5 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link1: Index IRQ Rtd Ref IRQs >> Initial Probe 0 3 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 3 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link2: Index IRQ Rtd Ref IRQs >> Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link3: Index IRQ Rtd Ref IRQs >> Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link4: Index IRQ Rtd Ref IRQs >> Initial Probe 0 4 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 4 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link5: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link6: Index IRQ Rtd Ref IRQs >> Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pci_link7: Index IRQ Rtd Ref IRQs >> Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 >> Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 >> After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pci0: domain=0, physical bus=0 >> found-> vendor=0x1002, dev=0x7910, revid=0x00 >> domain=0, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1002, dev=0x7912, revid=0x00 >> domain=0, bus=0, slot=1, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1002, dev=0x7917, revid=0x00 >> domain=0, bus=0, slot=7, func=0 >> class=06-04-00, hdrtype=0x01, mfdev=0 >> cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> powerspec 3 supports D0 D3 current D0 >> MSI supports 1 message >> found-> vendor=0x1002, dev=0x4380, revid=0x00 >> domain=0, bus=0, slot=18, func=0 >> class=01-06-01, hdrtype=0x00, mfdev=0 >> cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=11 >> powerspec 2 supports D0 D3 current D0 >> map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled >> map[14]: type I/O Port, range 32, base 0xa000, size 2, enabled >> map[18]: type I/O Port, range 32, base 0x9000, size 3, enabled >> map[1c]: type I/O Port, range 32, base 0x8000, size 2, enabled >> map[20]: type I/O Port, range 32, base 0x7000, size 4, enabled >> map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled >> pcib0: matched entry for 0.18.INTA >> pcib0: slot 18 INTA hardwired to IRQ 22 >> found-> vendor=0x1002, dev=0x4387, revid=0x00 >> domain=0, bus=0, slot=19, func=0 >> class=0c-03-10, hdrtype=0x00, mfdev=1 >> cmdreg=0x0517, statreg=0x02a0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled >> pcib0: matched entry for 0.19.INTA >> pcib0: slot 19 INTA hardwired to IRQ 16 >> ohci early: SMM active, request owner change >> found-> vendor=0x1002, dev=0x4388, revid=0x00 >> domain=0, bus=0, slot=19, func=1 >> class=0c-03-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=3 >> map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled >> pcib0: matched entry for 0.19.INTB >> pcib0: slot 19 INTB hardwired to IRQ 17 >> ohci early: SMM active, request owner change >> found-> vendor=0x1002, dev=0x4389, revid=0x00 >> domain=0, bus=0, slot=19, func=2 >> class=0c-03-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=c, irq=10 >> map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled >> pcib0: matched entry for 0.19.INTC >> pcib0: slot 19 INTC hardwired to IRQ 18 >> ohci early: SMM active, request owner change >> found-> vendor=0x1002, dev=0x438a, revid=0x00 >> domain=0, bus=0, slot=19, func=3 >> class=0c-03-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=3 >> map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled >> pcib0: matched entry for 0.19.INTB >> pcib0: slot 19 INTB hardwired to IRQ 17 >> ohci early: SMM active, request owner change >> found-> vendor=0x1002, dev=0x438b, revid=0x00 >> domain=0, bus=0, slot=19, func=4 >> class=0c-03-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=c, irq=10 >> map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled >> pcib0: matched entry for 0.19.INTC >> pcib0: slot 19 INTC hardwired to IRQ 18 >> ohci early: SMM active, request owner change >> found-> vendor=0x1002, dev=0x4386, revid=0x00 >> domain=0, bus=0, slot=19, func=5 >> class=0c-03-20, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=d, irq=10 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> map[10]: type Memory, range 32, base 0xfe7ff000, size 8, enabled >> pcib0: matched entry for 0.19.INTD >> pcib0: slot 19 INTD hardwired to IRQ 19 >> found-> vendor=0x1002, dev=0x4385, revid=0x13 >> domain=0, bus=0, slot=20, func=0 >> class=0c-05-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> map[10]: type I/O Port, range 32, base 0xb00, size 4, enabled >> map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled >> found-> vendor=0x1002, dev=0x438c, revid=0x00 >> domain=0, bus=0, slot=20, func=1 >> class=01-01-8a, hdrtype=0x00, mfdev=0 >> cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=255 >> MSI supports 1 message >> map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled >> found-> vendor=0x1002, dev=0x4383, revid=0x00 >> domain=0, bus=0, slot=20, func=2 >> class=04-03-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=5 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled >> pcib0: matched entry for 0.20.INTA >> pcib0: slot 20 INTA hardwired to IRQ 16 >> found-> vendor=0x1002, dev=0x438d, revid=0x00 >> domain=0, bus=0, slot=20, func=3 >> class=06-01-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1002, dev=0x4384, revid=0x00 >> domain=0, bus=0, slot=20, func=4 >> class=06-04-01, hdrtype=0x01, mfdev=1 >> cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1100, revid=0x00 >> domain=0, bus=0, slot=24, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1101, revid=0x00 >> domain=0, bus=0, slot=24, func=1 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1102, revid=0x00 >> domain=0, bus=0, slot=24, func=2 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> found-> vendor=0x1022, dev=0x1103, revid=0x00 >> domain=0, bus=0, slot=24, func=3 >> class=06-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >> pcib1: domain 0 >> pcib1: secondary bus 1 >> pcib1: subordinate bus 1 >> pcib1: I/O decode 0xc000-0xcfff >> pcib1: memory decode 0xfe800000-0xfe9fffff >> pcib1: prefetched decode 0xf0000000-0xf7ffffff >> pci1: <ACPI PCI bus> on pcib1 >> pci1: domain=0, physical bus=1 >> found-> vendor=0x1002, dev=0x791e, revid=0x00 >> domain=0, bus=1, slot=5, func=0 >> class=03-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=10 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size >> 27, e >> nabled >> pcib1: requested memory range 0xf0000000-0xf7ffffff: good >> map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled >> pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good >> map[20]: type I/O Port, range 32, base 0xc000, size 8, enabled >> pcib1: requested I/O range 0xc000-0xc0ff: in range >> map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled >> pcib1: requested memory range 0xfe800000-0xfe8fffff: good >> pcib1: matched entry for 1.5.INTA >> pcib1: slot 5 INTA hardwired to IRQ 18 >> found-> vendor=0x1002, dev=0x7919, revid=0x00 >> domain=0, bus=1, slot=5, func=2 >> class=04-03-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=b, irq=10 >> powerspec 2 supports D0 D3 current D0 >> MSI supports 1 message, 64 bit >> map[10]: type Memory, range 64, base 0xfe9e8000, size 14, enabled >> pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good >> pcib1: matched entry for 1.5.INTB >> pcib1: slot 5 INTB hardwired to IRQ 19 >> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem >> 0xf0000000-0xf7ffffff,0 >> xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1 >> pci1: <multimedia, HDA> at device 5.2 (no driver attached) >> pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 >> pcib2: domain 0 >> pcib2: secondary bus 2 >> pcib2: subordinate bus 2 >> pcib2: I/O decode 0xd000-0xdfff >> pcib2: memory decode 0xfea00000-0xfeafffff >> pcib2: no prefetched decode >> pci2: <ACPI PCI bus> on pcib2 >> pci2: domain=0, physical bus=2 >> found-> vendor=0x10ec, dev=0x8168, revid=0x01 >> domain=0, bus=2, slot=0, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >> intpin=a, irq=10 >> powerspec 2 supports D0 D1 D2 D3 current D0 >> MSI supports 2 messages, 64 bit >> map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled >> pcib2: requested I/O range 0xd800-0xd8ff: in range >> map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled >> pcib2: requested memory range 0xfeaff000-0xfeafffff: good >> pcib2: matched entry for 2.0.INTA >> pcib2: slot 0 INTA hardwired to IRQ 19 >> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port >> 0xd800-0xd8f >> f mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 >> re0: MSI count : 2 >> re0: MSI-X count : 0 >> re0: attempting to allocate 1 MSI vectors (2 supported) >> msi: routing MSI IRQ 256 to local APIC 0 vector 49 >> re0: using IRQ 256 for MSI >> re0: Using 1 MSI message >> re0: Chip rev. 0x38000000 >> re0: MAC rev. 0x00000000 >> miibus0: <MII bus> on re0 >> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 >> rgephy0: OUI 0x00e04c, model 0x0011, rev. 2 >> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, >> 100baseTX-FDX >> , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, >> 1000baseT-FDX- >> master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow >> re0: bpf attached >> re0: Ethernet address: 00:19:db:63:76:3e >> ahci0: <ATI IXP600 AHCI SATA controller> port >> 0xb000-0xb007,0xa000-0xa003,0x9000 >> -0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at >> device 1 >> 8.0 on pci0 >> ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50 >> ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported >> ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports >> ahci0: Caps2: >> ahcich0: <AHCI channel> at channel 0 on ahci0 >> ahcich0: Caps: HPCP >> ahcich1: <AHCI channel> at channel 1 on ahci0 >> ahcich1: Caps: HPCP >> ahcich2: <AHCI channel> at channel 2 on ahci0 >> ahcich2: Caps: HPCP >> ahcich3: <AHCI channel> at channel 3 on ahci0 >> ahcich3: Caps: HPCP >> ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at >> devic >> e 19.0 on pci0 >> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51 >> usbus0: <OHCI (generic) USB controller> on ohci0 >> usbus0: bpf attached >> ohci0: usbpf: Attached >> ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at >> devic >> e 19.1 on pci0 >> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52 >> usbus1: <OHCI (generic) USB controller> on ohci1 >> usbus1: bpf attached >> ohci1: usbpf: Attached >> ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at >> devic >> e 19.2 on pci0 >> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 >> usbus2: <OHCI (generic) USB controller> on ohci2 >> usbus2: bpf attached >> ohci2: usbpf: Attached >> ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at >> devic >> e 19.3 on pci0 >> usbus3: <OHCI (generic) USB controller> on ohci3 >> usbus3: bpf attached >> ohci3: usbpf: Attached >> ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at >> devic >> e 19.4 on pci0 >> usbus4: <OHCI (generic) USB controller> on ohci4 >> usbus4: bpf attached >> ohci4: usbpf: Attached >> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 >> at d >> evice 19.5 on pci0 >> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 >> ehci0: AMD SB600/700 quirk applied >> ehci0: Dropped interrupts workaround enabled >> usbus5: EHCI version 1.0 >> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 >> usbus5: bpf attached >> ehci0: usbpf: Attached >> pci0: <serial bus, SMBus> at device 20.0 (no driver attached) >> atapci0: <ATI IXP600 UDMA133 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 >> 6,0xff00-0xff0f at device 20.1 on pci0 >> ata0: <ATA channel> at channel 0 on atapci0 >> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 >> pci0: <multimedia, HDA> at device 20.2 (no driver attached) >> isab0: <PCI-ISA bridge> at device 20.3 on pci0 >> isa0: <ISA bus> on isab0 >> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >> pcib3: domain 0 >> pcib3: secondary bus 3 >> pcib3: subordinate bus 3 >> pcib3: I/O decode 0xe000-0xefff >> pcib3: memory decode 0xfeb00000-0xfebfffff >> pcib3: no prefetched decode >> pcib3: Subtractively decoded bridge. >> pci3: <ACPI PCI bus> on pcib3 >> pci3: domain=0, physical bus=3 >> found-> vendor=0x1106, dev=0x3044, revid=0xc0 >> domain=0, bus=3, slot=0, func=0 >> class=0c-00-10, hdrtype=0x00, mfdev=0 >> cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) >> intpin=a, irq=4 >> powerspec 2 supports D0 D2 D3 current D0 >> map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled >> pcib3: requested memory range 0xfebff800-0xfebfffff: good >> map[14]: type I/O Port, range 32, base 0xe800, size 7, enabled >> pcib3: requested I/O range 0xe800-0xe87f: in range >> pcib3: matched entry for 3.0.INTA >> pcib3: slot 0 INTA hardwired to IRQ 20 >> pci3: <serial bus, FireWire> at device 0.0 (no driver attached) >> acpi_button0: <Power Button> on acpi0 >> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment >> 0.50 >> 0000000s) >> ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 >> Event timer "RTC" frequency 32768 Hz quality 0 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> device_attach: hpet0 attach returned 12 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> atkbd: the current kbd controller command byte 0065 >> atkbd: keyboard ID 0x41ab (2) >> kbd0 at atkbd0 >> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 >> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 >> atkbd0: [GIANT-LOCKED] >> psm0: unable to allocate IRQ >> acpi0: wakeup code va 0xffffff8087fae000 pa 0x4000 >> isa_probe_children: disabling PnP devices >> atkbdc: atkbdc0 already exists; skipping it >> atrtc: atrtc0 already exists; skipping it >> attimer: attimer0 already exists; skipping it >> sc: sc0 already exists; skipping it >> isa_probe_children: probing non-PnP devices >> orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 >> ppc0 failed to probe at irq 7 on isa0 >> uart0 failed to probe at port 0x3f8 irq 4 on isa0 >> uart1 failed to probe at port 0x2f8 irq 3 on isa0 >> isa_probe_children: probing PnP devices >> acpi_throttle0: <ACPI CPU Throttling> on cpu0 >> acpi_throttle0: CLK_VAL field overlaps THT_EN bit >> device_attach: acpi_throttle0 attach returned 6 >> powernow0: <PowerNow! K8> on cpu0 >> powernow0: STATUS: 0x310a120c0a0e020e >> powernow0: STATUS: maxfid: 0x0e >> powernow0: STATUS: maxvid: 0x0a >> device_attach: powernow0 attach returned 6 >> powernow1: <PowerNow! K8> on cpu1 >> powernow1: STATUS: 0x310a120c0a0e020e >> powernow1: STATUS: maxfid: 0x0e >> powernow1: STATUS: maxvid: 0x0a >> device_attach: powernow1 attach returned 6 >> Device configuration finished. >> procfs registered >> lapic: Divisor 2, Frequency 99761963 Hz >> Timecounters tick every 1.000 msec >> vlan: initialized, using hash tables with chaining >> lo0: bpf attached >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 12Mbps Full Speed USB v1.0 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 480Mbps High Speed USB v2.0 >> ahcich0: AHCI reset... >> ahcich0: SATA connect time=100us status=00000123 >> ahcich0: AHCI reset: device found >> ahcich1: AHCI reset... >> ahcich1: SATA connect time=100us status=00000123 >> ahcich1: AHCI reset: device found >> ahcich2: AHCI reset... >> ahcich2: SATA connect time=100us status=00000123 >> ahcich2: AHCI reset: device found >> ahcich3: AHCI reset... >> ahcich3: SATA connect time=100us status=00000123 >> ahcich3: AHCI reset: device found >> ugen0.1: <ATI> at usbus0 >> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1: <ATI> at usbus1 >> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen2.1: <ATI> at usbus2 >> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >> ugen3.1: <ATI> at usbus3 >> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >> ugen4.1: <ATI> at usbus4 >> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen5.1: <ATI> at usbus5 >> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 >> ata0: reset tp1 mask=03 ostat0=50 ostat1=50 >> ahcich0: AHCI reset: device ready after 100ms >> Expensive timeout(9) function: 0xffffffff802db3d0(0xfffffe00015abb00) >> 0.05421135 >> 9 s >> (aprobe0:ahcich0:0:15:0): Command timed out >> (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted >> (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 >> ahcich1: AHCI reset: device ready after 100ms >> (aprobe1:ahcich1:0:15:0): Command timed out >> (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted >> (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000 >> ahcich2: AHCI reset: device ready after 100ms >> (aprobe2:ahcich2:0:15:0): Command timed out >> (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted >> (aprobe0:ahcich2:0:0:0): SIGNATURE: 0000 >> ahcich3: AHCI reset: device ready after 100ms >> (aprobe3:ahcich3:0:15:0): Command timed out >> (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted >> (aprobe0:ahcich3:0:0:0): SIGNATURE: 0000 >> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata0: reset tp2 stat0=00 stat1=00 devices=0x30000 >> (aprobe1:ata0:0:0:0): SIGNATURE: eb14 >> (aprobe0:ata0:0:1:0): SIGNATURE: eb14 >> pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 >> pass0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device >> pass0: Serial Number 6QF0W6RN >> GEOM: new disk cd0 >> GEOM: new disk cd1 >> pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> pass0: Command Queueing enabled >> (cd0:ata0:0:0:0): SCSI status error >> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd0:ata0:0:0:0): CAM status: SCSI Status Error >> (cd0:ata0:0:0:0): SCSI status: Check Condition >> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) >> (cd0:ata0:0:0:0): Error 6, Unretryable error >> cd0 at ata0 bus 0 scbus4 target 0 lun 0 >> cd0: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device >> cd0: Serial Number 2005082900 >> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >> cd0: Attempt to query device size failed: NOT READY, Medium not present >> pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 >> pass1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device >> pass1: Serial Number W24044SM >> pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> pass1: Command Queueing enabled >> pass2 at ahcich2 bus 0 scbus2 target 0 lun 0 >> (cd1:ata0:0:1:0): SCSI status error >> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd1:ata0:0:1:0): CAM status: SCSI Status Error >> (cd1:ata0:0:1:0): SCSI status: Check Condition >> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray >> clos >> ed) >> (cd1:ata0:0:1:0): Error 6, Unretryable error >> cd1 at ata0 bus 0 scbus4 target 1 lun 0 >> cd1: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device >> cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >> cd1: Attempt to query device size failed: NOT READY, Medium not present - >> tray c >> losed >> pass2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device >> pass2: Serial Number 6QF0ZTQM >> pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> pass2: Command Queueing enabled >> pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 >> pass3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device >> pass3: Serial Number W240643V >> pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> pass3: Command Queueing enabled >> pass4 at ata0 bus 0 scbus4 target 0 lun 0 >> pass4: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device >> pass4: Serial Number 2005082900 >> pass4: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >> (cd0:ata0:0:0:0): SCSI status error >> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd0:ata0:0:0:0): CAM status: SCSI Status Error >> (cd0:ata0:0:0:0): SCSI status: Check Condition >> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) >> (cd0:ata0:0:0:0): Error 6, Unretryable error >> pass5 at ata0 bus 0 scbus4 target 1 lun 0 >> pass5: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device >> pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >> ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device >> ada0: Serial Number 6QF0W6RN >> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> ada0: Command Queueing enabled >> ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) >> ada0: Previously was known as ad4 >> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 >> ada1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device >> ada1: Serial Number W24044SM >> (cd0:ata0:0:0:0): SCSI status error >> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd0:ata0:0:0:0): CAM status: SCSI Status Error >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub3: 2 ports with 2 removable, self powered >> uhub4: 2 ports with 2 removable, self powered >> (cd0:ata0:0:0:0): SCSI status: Check Condition >> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) >> (cd0:ata0:0:0:0): Error 6, Unretryable error >> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> ada1: Command Queueing enabled >> ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >> ada1: Previously was known as ad6 >> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 >> ada2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device >> ada2: Serial Number 6QF0ZTQM >> ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> ada2: Command Queueing enabled >> ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) >> ada2: Previously was known as ad8 >> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 >> ada3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device >> (cd0:ata0:0:0:0): SCSI status error >> (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd0:ata0:0:0:0): CAM status: SCSI Status Error >> (cd0:ata0:0:0:0): SCSI status: Check Condition >> (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) >> (cd0:ata0:0:0:0): Error 6, Unretryable error >> ada3: Serial Number W240643V >> ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> ada3: Command Queueing enabled >> ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) >> ada3: Previously was known as ad10 >> SMP: AP CPU #1 Launched! >> cpu1 AP: >> ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff >> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff >> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 >> TSC timecounter discards lower 8 bit(s) >> Timecounter "TSC-low" frequency 8573416 Hz quality -100 >> WARNING: DIAGNOSTIC option enabled, expect reduced performance. >> (cd1:ata0:0:1:0): SCSI status error >> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd1:ata0:0:1:0): CAM status: SCSI Status Error >> (cd1:ata0:0:1:0): SCSI status: Check Condition >> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray >> clos >> ed) >> (cd1:ata0:0:1:0): Error 6, Unretryable error >> (cd1:ata0:0:1:0): SCSI status error >> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd1:ata0:0:1:0): CAM status: SCSI Status Error >> (cd1:ata0:0:1:0): SCSI status: Check Condition >> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray >> clos >> ed) >> (cd1:ata0:0:1:0): Error 6, Unretryable error >> (cd1:ata0:0:1:0): SCSI status error >> (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 >> (cd1:ata0:0:1:0): CAM status: SCSI Status Error >> (cd1:ata0:0:1:0): SCSI status: Check Condition >> (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray >> clos >> ed) >> (cd1:ata0:0:1:0): Error 6, Unretryable error >> GEOM: new disk ada0 >> GEOM: new disk ada1 >> GEOM: new disk ada2 >> GEOM: new disk ada3 >> GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s). >> GEOM: ada2s1: media size does not match label. >> Root mount waiting for: usbus5 >> Root mount waiting for: usbus5 >> Root mount waiting for: usbus5 >> uhub5: 10 ports with 10 removable, self powered >> Root mount waiting for: usbus5 >> Trying to mount root from ufs:/dev/ada0p2 [rw]... >> start_init: trying /sbin/init >> ugen1.2: <vendor 0x2222> at usbus1 >> ums0: <vendor 0x2222 Evoluent Vertical Mouse 2, class 0/0, rev 1.10/51.26, >> addr >> 2> on usbus1 >> ums0: 5 buttons and [XYZ] coordinates ID=0 >> ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is >> present; >> to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. >> ZFS filesystem version 5 >> ZFS storage pool version 28 >> * csup >> -------------------------------------------------------------- >>>>> Running /usr/bin/csup >> -------------------------------------------------------------- >> Parsing supfile "/root/csup/date-supfile" >> Connecting to cvsup.uk.freebsd.org >> Cannot connect to 2001:630:212:8:20e:cff:fe09:a69c: Protocol not supported >> Connected to 131.111.8.41 >> Server software version: SNAP_16_1h >> MD5 authentication started >> MD5 authentication successful >> Negotiating file attribute support >> Exchanging collection information >> Establishing multiplexed-mode data connection >> Running >> Updating collection src-all/cvs >> Edit src/sys/dev/acpica/acpi.c >> Add delta 1.305.2.4 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_ec.c >> Add delta 1.95.2.2 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_hpet.c >> Add delta 1.38.2.2 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpi_timer.c >> Add delta 1.50.2.3 2012.02.23.22.26.14 jkim >> Edit src/sys/dev/acpica/acpivar.h >> Add delta 1.125.2.4 2012.02.23.22.26.14 jkim >> Shutting down connection to server >> Finished successfully >> * supfil >> *default host=cvsup.uk.freebsd.org >> *default base=/var/db >> *default prefix=/usr >> *default release=cvs tag=RELENG_9 >> >> # ok: >> # *default date=2012.02.23.22.26.00 >> # fail: >> *default date=2012.02.23.22.26.30 >> >> *default delete use-rel-suffix >> *default compress >> src-all >> * pciconf -lvb >> hostb0@pci0:0:0:0: class=0x060000 card=0x79101002 chip=0x79101002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'RS690 Host Bridge' >> class = bridge >> subclass = HOST-PCI >> pcib1@pci0:0:1:0: class=0x060400 card=0x79121002 chip=0x79121002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc' >> device = 'RS690 PCI to PCI Bridge (Internal gfx)' >> class = bridge >> subclass = PCI-PCI >> pcib2@pci0:0:7:0: class=0x060400 card=0x79101002 chip=0x79171002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc' >> device = 'RS690 PCI to PCI Bridge (PCI Express Port 3)' >> class = bridge >> subclass = PCI-PCI >> ahci0@pci0:0:18:0: class=0x010601 card=0x73291462 chip=0x43801002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 Non-Raid-5 SATA' >> class = mass storage >> subclass = SATA >> bar [10] = type I/O Port, range 32, base 0xb000, size 8, enabled >> bar [14] = type I/O Port, range 32, base 0xa000, size 4, enabled >> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled >> bar [1c] = type I/O Port, range 32, base 0x8000, size 4, enabled >> bar [20] = type I/O Port, range 32, base 0x7000, size 16, enabled >> bar [24] = type Memory, range 32, base 0xfe7ff800, size 1024, enabled >> ohci0@pci0:0:19:0: class=0x0c0310 card=0x73271462 chip=0x43871002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB (OHCI0)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7fe000, size 4096, enabled >> ohci1@pci0:0:19:1: class=0x0c0310 card=0x73271462 chip=0x43881002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB (OHCI1)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7fd000, size 4096, enabled >> ohci2@pci0:0:19:2: class=0x0c0310 card=0x73271462 chip=0x43891002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB (OHCI2)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7fc000, size 4096, enabled >> ohci3@pci0:0:19:3: class=0x0c0310 card=0x73271462 chip=0x438a1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB (OHCI3)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7fb000, size 4096, enabled >> ohci4@pci0:0:19:4: class=0x0c0310 card=0x73271462 chip=0x438b1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB (OHCI4)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7fa000, size 4096, enabled >> ehci0@pci0:0:19:5: class=0x0c0320 card=0x73271462 chip=0x43861002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 USB Controller (EHCI)' >> class = serial bus >> subclass = USB >> bar [10] = type Memory, range 32, base 0xfe7ff000, size 256, enabled >> none0@pci0:0:20:0: class=0x0c0500 card=0x73271462 chip=0x43851002 >> rev=0x13 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SBx00 SMBus Controller' >> class = serial bus >> subclass = SMBus >> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled >> bar [14] = type Memory, range 32, base 0xfed00000, size 1024, enabled >> atapci0@pci0:0:20:1: class=0x01018a card=0x73271462 chip=0x438c1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 IDE' >> class = mass storage >> subclass = ATA >> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled >> none1@pci0:0:20:2: class=0x040300 card=0x73271462 chip=0x43831002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SBx00 Azalia (Intel HDA)' >> class = multimedia >> subclass = HDA >> bar [10] = type Memory, range 64, base 0xfe7f4000, size 16384, enabled >> isab0@pci0:0:20:3: class=0x060100 card=0x73271462 chip=0x438d1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'SB600 PCI to LPC Bridge' >> class = bridge >> subclass = PCI-ISA >> pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >> rev=0x00 >> hdr=0x01 >> vendor = 'ATI Technologies Inc' >> device = 'SBx00 PCI to PCI Bridge' >> class = bridge >> subclass = PCI-PCI >> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices [AMD]' >> device = 'K8 [Athlon64/Opteron] HyperTransport Technology >> Configuration' >> >> class = bridge >> subclass = HOST-PCI >> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices [AMD]' >> device = 'K8 [Athlon64/Opteron] Address Map' >> class = bridge >> subclass = HOST-PCI >> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices [AMD]' >> device = 'K8 [Athlon64/Opteron] DRAM Controller' >> class = bridge >> subclass = HOST-PCI >> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 >> rev=0x00 >> hdr=0x00 >> vendor = 'Advanced Micro Devices [AMD]' >> device = 'K8 [Athlon64/Opteron] Miscellaneous Control' >> class = bridge >> subclass = HOST-PCI >> vgapci0@pci0:1:5:0: class=0x030000 card=0x73271462 chip=0x791e1002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'RS690 [Radeon X1200 Series]' >> class = display >> subclass = VGA >> bar [10] = type Prefetchable Memory, range 64, base 0xf0000000, size >> 13421 >> 7728, enabled >> bar [18] = type Memory, range 64, base 0xfe9f0000, size 65536, enabled >> bar [20] = type I/O Port, range 32, base 0xc000, size 256, enabled >> bar [24] = type Memory, range 32, base 0xfe800000, size 1048576, enabled >> none2@pci0:1:5:2: class=0x040300 card=0x79191002 chip=0x79191002 >> rev=0x00 >> hdr=0x00 >> vendor = 'ATI Technologies Inc' >> device = 'Radeon X1200 Series Audio Controller' >> class = multimedia >> subclass = HDA >> bar [10] = type Memory, range 64, base 0xfe9e8000, size 16384, enabled >> re0@pci0:2:0:0: class=0x020000 card=0x327c1462 chip=0x816810ec rev=0x01 >> hdr=0x00 >> >> vendor = 'Realtek Semiconductor Co., Ltd.' >> device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' >> class = network >> subclass = ethernet >> bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled >> bar [18] = type Memory, range 64, base 0xfeaff000, size 4096, enabled >> none3@pci0:3:0:0: class=0x0c0010 card=0x086c0574 chip=0x30441106 >> rev=0xc0 >> hdr=0x00 >> vendor = 'VIA Technologies, Inc.' >> device = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller' >> class = serial bus >> subclass = FireWire >> bar [10] = type Memory, range 32, base 0xfebff800, size 2048, enabled >> bar [14] = type I/O Port, range 32, base 0xe800, size 128, enabled >> >> >> >> On 29 February 2012 14:12, John Baldwin <j...@freebsd.org> wrote: >>> On Tuesday, February 28, 2012 6:10:51 pm Harry Newton wrote: >>>> Adrian - thanks ! >>>> >>>> John, if you write me a shopping list of what information you think >>>> useful, assuming you have time and inclination, I'll do my best >>>> provide it. >>> >>> Mostly a verbose boot of 9.0-RELEASE and what you see now. If anything the >>> only changes I can think of since the release are to make some of the PCI >>> code >>> more lenient. You could also try to narrow down exactly which revision >>> causes >>> the hang using a binary search of 9.0-STABLE since the release. >>> >>> -- >>> John Baldwin >> >> >> >> -- >> Harry Newton -- Harry Newton _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
