On Sat, 21 Jan 2012 22:57:05 +0200, Alexander Motin wrote > Hi. > > On 01/21/12 21:34, mato wrote: > > I've used freebsd-update to upgrade from 8.2-R to 9.0-R and all looked nice > > until the first reboot. Now my FreeBSD always hangs midway through the boot > > process and the last message output is: > > "uhub3:<Intel EHCI root HUB..." > > I've tried safe boot option but that does not help at all. > > When I disable USB support in BIOS the last message before hang is: > > "ata1: reset tp1 mask=03 ostat0=00 ostat1=00 > > (aprobe0:ata0:0:1:0): SIGNATURE: eb14" > > > > Any idea what might be wrong and how to fix it please ? > > The last line is the ATAPI device detection. What ATA controller do > you have there? On one Core2Duo-class Supermicro system alike hang > was caused by ITE PATA controller. In that case it was workarounded > by adding hint.ata.0.mode="PIO4" to /oot/loader.conf. You may try > just set it from loader prompt with `set` command. >
I don't know exact controller but this is Pentium M based laptop. HDD is primary master while DVD drive is primary slave. :-/ And it's been working like this since FreeBSD 5.3. Anyway, I've tried your advice but unfortunately it did not help. Here is longer log (retyped from screen): ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x20001 (aprobe0:ata0:0:0:0): SIGNATURE: 0000 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 (aprobe0:ata0:0:1:0): SIGNATURE: eb14" Then it hangs. And please note it looks differently when USB is not turned off in BIOS. Though I have no idea if / how that matters. So what now please ? Any other things to try ? Thanks, Martin ---------------------------------------- Freehosting PIPNI - http://www.pipni.cz/ _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
