Been using this with stable for a few months. thought I would share. works like a dream.
-Darren ----- Forwarded Message ----- From: PseudoCylon <moonlightak...@yahoo.ca> To: Mr. Darren <darren...@yahoo.com> Sent: Tuesday, July 26, 2011 4:17:32 AM Subject: Re: if_run It seems it uses different IDs. add a following line somewhere in /usr/src/sys/dev/usb/usbdevs (The order doesn't matter as long as it's bellow bunch of entries begin with "vendor".) product CISCOLINKSYS AE1000 0x002f Cisco AE1000 and insert following to line 150 of /usr/src/sys/dev/usb/wlan/if_run.c (The order doesn't matter as long as it is in struct usb_device_id run_devs[].) RUN_DEV(CISCOLINKSYS, AE1000), Recompile and load the driver. If you have compiled the driver into the kernel (using GENERIC kernel), you need to recompile whole kernel. But, with KERNFAST option, # make buildkernel KERNCONF=GENERIC KERNFAST=1 it would take only a few minutes. Then, reboot. Let me know if it works. I will submit the new IDs. AK On Mon, Jul 25, 2011 at 7:21 PM, Mr. Darren <darren...@yahoo.com> wrote: > I thought so. However this seems to be the only mention in dmesg > ugen1.3: <Linksys> at usbus1 > FreeBSD .ed.shawcable.net 8.2-STABLE FreeBSD 8.2-STABLE #1: Mon Jul 25 > 01:36:49 UTC 2011 r...@.ed.shawcable.net:/usr/obj/usr/src/sys/GENERIC > amd64 > on reconnect of usb > Jul 25 19:20:49 root: Unknown USB device: vendor 0x13b1 product 0x002f bus > uhub1 > Jul 25 19:20:49 kernel: ugen1.3: <Linksys> at usbus1 > > > Darren Johnston > > ________________________________ > From: PseudoCylon <moonlightak...@yahoo.ca> > To: Mr. Darren <darren...@yahoo.com> > Sent: Mon, July 25, 2011 11:09:33 AM > Subject: Re: if_run > > On Mon, Jul 25, 2011 at 3:40 AM, Mr. Darren <darren...@yahoo.com> wrote: >> >> I noticed your work on the rt3572 if_run and was wondering if it can apply >> to cisco linksys ae1000? >> > > It seems ae1000 also uses rt3572. > http://www.wikidevi.com/wiki/Linksys_AE1000 > If that true, if_run should work on ae1000 as well. > > > AK > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
