Hi, Sorry about being unclear. They all failed in the same way.
So, these combinations have continuous timeout errors and fail to completely boot: Plain 9.0-RC1 9-stable with 1.62 of mfi.c 9-stable with www.freebsd.org/~jhb/patches/mfi.patch, pci_alloc_msi instead of pci_alloc_msix and hw.mfi.msix=0 This boots, but gets "mfi0: Cannot allocate interrupt" and there are no /dev/mfi* devices: 9-stable with www.freebsd.org/~jhb/patches/mfi.patch and hw.mfi.msix=1 This seems to work, but I have not put any load on it yet: 9-stable with www.freebsd.org/~jhb/patches/mfi.patch, pci_alloc_msi instead of pci_alloc_msix and hw.mfi.msix=1 I see you have a new patch, www.freebsd.org/~jhb/patches/mfi_msi.patch. This patch doesn't seem to include the dummy read from your earlier patch, or the one in 1.62 of mfi.c. I assume I need to apply the 1.62 mfi.c diff to by 9-stable sources as well. Is that correct? Will test out the new patch. Thanks, Jan Mikkelsen On 15/11/2011, at 3:36 AM, John Baldwin wrote: > On Monday, November 14, 2011 3:03:42 am Jan Mikkelsen wrote: >> Hi, >> >> I have just tested mfi on a machine that has just arrived. I'm seeing the >> command timeout problem on boot with 9.0-RC1. >> >> The message is "mfi0: COMMAND <addr> TIMEOUT AFTER 59 seconds", and then >> repeats every 30 seconds (with the time changed, obviously). >> >> I have tested the 9.0-RC1 ISO, a 9-stable kernel patched with the patch from >> the PR I referenced below (also in FreeBSD cvs in revision 1.62 of > src/sys/dev/mfi/mfi.c), and 9-stable kernel with the patch at > www.freebsd.org/~jhb/patches/mfi.patch with the 'pci_alloc_msix' call changed > to > 'pci_alloc_msi'. > > You forgot to mention what happened from those tests, did any of them work? > > -- > John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
