On Sun, Apr 17, 2011 at 08:14:40PM +0400, Lystopad Olexandr wrote: > On Sun, Apr 17, 2011 at 04:54:34PM +0300 > gkontos.m...@gmail.com wrote about "Re: ZFS root on MB Intel S3420GP": > > There is a nice guide in the WIKI regarding how to install your system with > > ZFS on root. > > > > http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/RAIDZ2 > > > > In any case don't configure the raid in your controller and let ZFS take > > care of this. > > Thanks for answer! > > Is it possible to hot change disks with zfs raid on my motherboard?
This has little to do with ZFS and more to do with SATA. You will need a hot-swap backplane for this to be possible. Decent server chassis usually provide this. We use Supermicro systems with hot-swap backplanes and they work fantastic with FreeBSD + ahci.ko. If you do not have a hot-swap backplane, there is a very good chance "strange things" will happen when you yank power or the signal cable. I've personally tried it on a test system without a hot-swap bay. When I pulled the SATA power connector from the hard disk, I saw a blue spark near the power connector and the entire system lost power. I've blogged about hot-swapping SATA disks on FreeBSD with ZFS in use and with ahci.ko, with full kernel output and all necessary details: http://koitsu.wordpress.com/2010/07/22/freebsd-and-zfs-hot-swapping-sata-disks-with-ahci/ Please note the blog post demonstrated how I went about upgrading disks without needing to power the system off. Readers have commented how I could have done it all by using the spare bay I had, but I explicitly chose *not* to use that bay for the benefit of the readers who might not have a spare bay. Furthermore, the "zpool offline" steps probably aren't needed (ZFS should note the disk as UNAVAIL immediately and the array should become degraded), same with "zpool online". I should really refine those procedures, or re-do the post for present-day 8.2-RELEASE. When doing administrative/maintenance tasks, I tend to do as much possible to ensure the kernel/system knows what I'm about to do. :-) If you want me to perform an actual disk failure (literally yanking a disk out of a bay while the disk is in use + part of a ZFS pool), I can do that without any worry and provide the results here. Just ask. -- | Jeremy Chadwick j...@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
