You were right about SATA mode, I should miss something when I try
switch it first time or may be there're some other reasons, like
previously I tried i386. Anyway there's HDD. But it's all doesn't find
HDD with SATA native disabled, but I'd like to have this working old
way for some reasons.
I've not tried to enble labeling, but i think that it wouldn't work
because with disabled native mode there's no any entry about HDD like
with native mode enabled. And when I get promted to enter new boot
point and pressing '?' there's only acd drive with enabled native
mode, but with enabled native mode there's acd, hdd and also
automaticaly created labels.
I'm still thinking that the some of the drivers or one of them is
broken or maybe some modules are no longer included. Now I've got two
kernels, is there a way to find out where's the problem, 'cos I think
I can just put old driver source code and recompile kernel to get
things working back in old way?
And as you ask me - dmesg logs. With SATA native enabled there's a
slightly different controller strings and I think there's the problem
------------------------------------------------------------
------------------------------------------------------------
Working good at all points - 8.1 RELEASE kernel, dunno REVISION
Default configuration working with SATA native disabled:
------------------------------------------------------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU T2410 @ 2.00GHz (1995.02-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2047451136 (1952 MB)
ACPI APIC Table: <HP 30D8 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem
0xe4400000-0xe44fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
pci0
agp0: <Intel GME965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xe4500000-0xe45fffff at device
2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x4020-0x403f
mem 0xe4600000-0xe461ffff,0xe4620000-0xe4620fff irq 22 at device 25.0
on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1f:29:9c:7a:12
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x4040-0x405f
irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xe4621000-0xe46213ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci16: <ACPI PCI bus> on pcib2
siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem
0xe4000000-0xe4003fff irq 17 at device 0.0 on pci16
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO
(manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
bwn0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci40: <ACPI PCI bus> on pcib3
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f
irq 20 at device 29.0 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus2: <Intel 82801H (ICH8) USB controller USB-A> on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f
irq 21 at device 29.1 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-B> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf
irq 18 at device 29.2 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-C> on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xe4628000-0xe46283ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf,0x40d0-0x40df irq 17
at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz3: _CRT value is absurd, ignored (256.0C)
acpi_tz4: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ad0: 152627MB <Hitachi HTS542516K9A300 BBCOC3MP> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
acd0: DVDR <Optiarc DVD RW AD-7561A/GH09> at ata1-master PIO4
SMP: AP CPU #1 Launched!
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus1
Root mount waiting for: usbus5 usbus1
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ad0s3a
ugen2.2: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
kbd2 at ukbd0
ums0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
-----------------------------------------------------------------
-----------------------------------------------------------------
Newly compiled trouble kernel - REVISION 216724
Working good with SATA native enabled
-----------------------------------------------------------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #0: Mon Dec 27 16:15:01 MSK 2010
root@:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU T2410 @ 2.00GHz (1995.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2044231680 (1949 MB)
ACPI APIC Table: <HP 30D8 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem
0xe4400000-0xe44fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
pci0
agp0: <Intel GME965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xe4500000-0xe45fffff at device
2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.1.8> port 0x4020-0x403f
mem 0xe4600000-0xe461ffff,0xe4620000-0xe4620fff irq 22 at device 25.0
on pci0
em0: Using an MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1f:29:9c:7a:12
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x4040-0x405f
irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xe4621000-0xe46213ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci16: <ACPI PCI bus> on pcib2
siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem
0xe4000000-0xe4003fff irq 17 at device 0.0 on pci16
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO
(manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
bwn0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci40: <ACPI PCI bus> on pcib3
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f
irq 20 at device 29.0 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus2: <Intel 82801H (ICH8) USB controller USB-A> on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f
irq 21 at device 29.1 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-B> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf
irq 18 at device 29.2 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-C> on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xe4628000-0xe46283ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 16 at device
31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port
0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x4100-0x411f
mem 0xe4629000-0xe46297ff irq 17 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 3 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz3: _CRT value is absurd, ignored (256.0C)
acpi_tz4: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
acd0: DVDR <Optiarc DVD RW AD-7561A/GH09> at ata0-master PIO4
ad4: 152627MB <Hitachi HTS542516K9A300 BBCOC3MP> at ata2-master
UDMA100 SATA 3Gb/s
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus1
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ad4s3a
ugen2.2: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
kbd2 at ukbd0
ums0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev
2.00/6.34, addr 2> on usbus2
------------------------------------------------------------
------------------------------------------------------------
And troubles with SATA Native disabled: REVISION 216724
(Log was reprodused by photos)
------------------------------------------------------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #0: Mon Dec 27 16:15:01 MSK 2010
root@:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU T2410 @ 2.00GHz (1995.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping
= 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2044231680 (1949 MB)
ACPI APIC Table: <HP 30D8 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem
0xe4400000-0xe44fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
pci0
agp0: <Intel GME965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xe4500000-0xe45fffff at device
2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.1.8> port 0x4020-0x403f
mem 0xe4600000-0xe461ffff,0xe4620000-0xe4620fff irq 22 at device 25.0
on pci0
em0: Using an MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1f:29:9c:7a:12
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x4040-0x405f
irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xe4621000-0xe46213ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci16: <ACPI PCI bus> on pcib2
siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem
0xe4000000-0xe4003fff irq 17 at device 0.0 on pci16
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO
(manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
bwn0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci40: <ACPI PCI bus> on pcib3
uhci1: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f
irq 20 at device 29.0 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus2: <Intel 82801H (ICH8) USB controller USB-A> on uhci1
uhci2: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f
irq 21 at device 29.1 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-B> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf
irq 18 at device 29.2 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-C> on uhci3
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xe4628000-0xe46283ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 17 at device
31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata2: <ATA channel 1> on atapci0
ata2: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz3: _CRT value is absurd, ignored (256.0C)
acpi_tz4: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
acd0: DVDR <Optiarc DVD RW AD-7561A/GH09> at ata0-master PIO4
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus1
uhub1: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ad4s3a
ROOT MOUNT ERROR
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
