Jonathan Chen wrote: > On 25/11/2010 10:02, Alexander Motin wrote: >> It would be useful if you posted somewhere full _verbose_ dmesg. > > Here it is: > > ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port > 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf > mem 0xff870000-0xff8707ff irq 18 at device 31.2 on pci0 > ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff870000 > ahci0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 259 to local APIC 0 vector 54 > ahci0: using IRQ 259 for MSI > ahci0: [MPSAFE] > ahci0: [ITHREAD] > ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported with FBS > ahci0: Caps: 64bit NCQ SNTF AL CLO 3Gbps PM FBS PMD 32cmd EM eSATA 6ports > ahci0: Caps2: APST > ahci0: EM Caps: ALHD XMT SMB LED > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich0: [MPSAFE] > ahcich0: [ITHREAD] > ahcich0: Caps: > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich1: [MPSAFE] > ahcich1: [ITHREAD] > ahcich1: Caps: > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich2: [MPSAFE] > ahcich2: [ITHREAD] > ahcich2: Caps: > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich3: [MPSAFE] > ahcich3: [ITHREAD] > ahcich3: Caps: > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich4: [MPSAFE] > ahcich4: [ITHREAD] > ahcich4: Caps: HPCP ESP FBSCP
Interesting. It is the first Intel AHCI controller I see, supporting FIS-based switching with port multiplier. I would really like to test it sometimes with port multiplier connected to internal and external ports. > hdac1: Patched pins configuration: > hdac1: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc > 1 color Black misc 1 [DISABLED] > hdac1: nid 20 0x99130110 as 1 seq 0 Speaker Fixed jack 3 loc > 25 color Unknown misc 1 > hdac1: nid 23 0x411111f0 as 15 seq 0 Speaker None jack 1 loc > 1 color Black misc 1 [DISABLED] > hdac1: nid 24 0x02a19830 as 3 seq 0 Mic Jack jack 1 loc > 2 color Pink misc 8 > hdac1: nid 25 0x01a19840 as 4 seq 0 Mic Jack jack 1 loc > 1 color Pink misc 8 > hdac1: nid 26 0x411111f0 as 15 seq 0 Speaker None jack 1 loc > 1 color Black misc 1 [DISABLED] > hdac1: nid 27 0x01014020 as 2 seq 0 Line-out Jack jack 1 loc > 1 color Green misc 0 > hdac1: nid 29 0x411111f0 as 15 seq 0 Speaker None jack 1 loc > 1 color Black misc 1 [DISABLED] > hdac1: nid 30 0x411111f0 as 15 seq 0 Speaker None jack 1 loc > 1 color Black misc 1 [DISABLED] > hdac1: nid 33 0x0221402f as 2 seq 15 Headphones Jack jack 1 loc > 2 color Green misc 0 > hdac1: 4 associations found: > hdac1: Association 0 (1) out: > hdac1: Pin nid=20 seq=0 > hdac1: Association 1 (2) out: > hdac1: Pin nid=27 seq=0 > hdac1: Pin nid=33 seq=15 > hdac1: Association 2 (3) in: > hdac1: Pin nid=24 seq=0 > hdac1: Association 3 (4) in: > hdac1: Pin nid=25 seq=0 I see no obvious problems there. pcm4 device should respond for internal speaker and front microphone. pcm5 device should go to rear connectors. What things you have tried to test there? -- Alexander Motin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
