Kirill Yelizarov wrote: > I have a problem with booting 8.1-stable from compact flash. This maybe some > speed selection issue. I have two verbose dmesg of the same hardware: 7.2 > stable and 8.1-stable. The main difference in 7.2 is such message: > ad0: setting PIO4 on ICH5 chip > > ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED> > > ad0: 3887MB <TRANSCEND 20081024> at ata0-master PIO4 > But 7.2 starts and run. > And 8.1 stable when trying to mount root shows the following > Trying to mount root from ufs:/dev/ad0p2 > ct_to_ts([2010-11-15 12:41:03]) = 1289824863.000000000 > start_init: trying /sbin/init > Nov 15 15:41:03 init: /bin/sh on /etc/rc terminated abnormally, going to > singlee > Enter full pathname of shell or RETURN for /bin/sh: > And then i can only switch if off using acpi or just power off. > > I know there were changes in ata. Maybe there are some tunings available to > select PIO4 (most cf are using it)?
In 8-STABLE there were added tunables hint.ata.X.devX.mode and hint.ata.X.mode to set ATA mode during boot. Before that - only hw.ata.ata_dma. > P.S. I have two verbose dmesg but they are rather big. If needed i can post > them hear. Verbose dmesg could be useful in many cases. Better upload it somewhere else and post a link here. -- Alexander Motin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
