On Sat, Aug 21, 2010 at 11:09:04PM +0200, Stefan Bethke wrote: > Am 21.08.2010 um 23:02 schrieb Andriy Gapon: > > > on 21/08/2010 23:33 Stefan Bethke said the following: > >> Hi, > >> > >> somewhat foolishly, I activated watchdogd and ichwd on a remote box, and > >> while testing it (by suspending watchdogd), apparently the watchdog > >> triggered. But instead of resetting, the machine does not react anymore on > >> the serial console. I will have to wait until Monday to get physical > >> access, > >> so it might be hanging or just switched itself off; I have no way of > >> telling > >> right now. > >> > >> ichwd probes as: ichwd0: <Intel ICH7 watchdog timer> on isa0 ichwd0: Intel > >> ICH7 watchdog timer (ICH7 or equivalent) ppc0: cannot reserve I/O port > >> range > >> > >> (not sure why ppc0 is getting involved at that point.) > >> > >> FreeBSD lokschuppen.zs64.net 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #30: Thu > >> Jul 15 12:58:20 UTC 2010 > >> r...@lokschuppen.zs64.net:/usr/obj/usr/src/sys/EISENBOOT amd64 > >> > >> Once the box is up again, is it worthwile trying ichwd again, should I try > >> and use SW_WATCHDOG, or forget about it? > > > > Just test it more while having physical access before making any > > conclusions. > > There could be a number of radically different possibilities ranging from > > hardware peculiarities to configuration problems to pilot errors to etc. > > I guess what I'm looking for is some confirmation that ichwd is working > properly on this particular hardware: Asus Pundit P4 P5G41 with a G41 chipset. > > Below are pciconv -lvb and dmesg: > > hos...@pci0:0:0:0: class=0x060000 card=0x836d1043 chip=0x2e308086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > class = bridge > subclass = HOST-PCI > vgap...@pci0:0:2:0: class=0x030000 card=0x836d1043 chip=0x2e328086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel G41 express graphics > (PCIVEN_8086&DEV_2E32&SUBSYS_31031565&REV_033&115)' > class = display > subclass = VGA > bar [10] = type Memory, range 64, base 0xfe400000, size 4194304, enabled > bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size > 268435456, enabled > bar [20] = type I/O Port, range 32, base 0xbc00, size 8, enabled > vgap...@pci0:0:2:1: class=0x038000 card=0x836d1043 chip=0x2e338086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > class = display > bar [10] = type Memory, range 64, base 0xfe800000, size 1048576, enabled > no...@pci0:0:27:0: class=0x040300 card=0x82fe1043 chip=0x27d88086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'IDT High Definition Audio Driver (BA101897)' > class = multimedia > subclass = HDA > bar [10] = type Memory, range 64, base 0xfe3f8000, size 16384, enabled > pc...@pci0:0:28:0: class=0x060400 card=0x81791043 chip=0x27d08086 rev=0x01 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pc...@pci0:0:28:2: class=0x060400 card=0x81791043 chip=0x27d48086 rev=0x01 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > pc...@pci0:0:28:3: class=0x060400 card=0x81791043 chip=0x27d68086 rev=0x01 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCIe Root Port' > class = bridge > subclass = PCI-PCI > uh...@pci0:0:29:0: class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > bar [20] = type I/O Port, range 32, base 0xb400, size 32, enabled > uh...@pci0:0:29:1: class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > bar [20] = type I/O Port, range 32, base 0xb480, size 32, enabled > uh...@pci0:0:29:2: class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > bar [20] = type I/O Port, range 32, base 0xb800, size 32, enabled > uh...@pci0:0:29:3: class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > bar [20] = type I/O Port, range 32, base 0xb880, size 32, enabled > eh...@pci0:0:29:7: class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe3f7c00, size 1024, enabled > pc...@pci0:0:30:0: class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to > PCI Bridge' > class = bridge > subclass = PCI-PCI > is...@pci0:0:31:0: class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel 82801GB/GR (ICH7 Family) LPC Interface Controller - > 27B8 (945GL)' > class = bridge > subclass = PCI-ISA > atap...@pci0:0:31:1: class=0x01018a card=0x81791043 chip=0x27df8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) Ultra ATA Storage Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled > bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled > bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled > bar [20] = type I/O Port, range 32, base 0xffa0, size 16, enabled > atap...@pci0:0:31:2: class=0x01018f card=0x81791043 chip=0x27c08086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller' > class = mass storage > subclass = ATA > bar [10] = type I/O Port, range 32, base 0xb080, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xb000, size 4, enabled > bar [18] = type I/O Port, range 32, base 0xac00, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0xa880, size 4, enabled > bar [20] = type I/O Port, range 32, base 0xa800, size 16, enabled > no...@pci0:0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel[R] 82801G (ICH7 Family) C- 27DA (82801G)' > class = serial bus > subclass = SMBus > bar [20] = type I/O Port, range 32, base 0x400, size 32, enabled > e...@pci0:3:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel 82574L Gigabit Ethernet Controller (82574L)' > class = network > subclass = ethernet > bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled > bar [14] = type Memory, range 32, base 0xfeb00000, size 524288, enabled > bar [18] = type I/O Port, range 32, base 0xec00, size 32, enabled > bar [1c] = type Memory, range 32, base 0xfebdc000, size 16384, enabled > r...@pci0:2:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 > hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled > bar [18] = type Prefetchable Memory, range 64, base 0xfdfff000, size > 4096, enabled > bar [20] = type Prefetchable Memory, range 64, base 0xfdfe0000, size > 65536, enabled > no...@pci0:1:0:0: class=0x0c0010 card=0x34011106 chip=0x34011106 rev=0x00 > hdr=0x00 > vendor = 'VIA Technologies, Inc.' > class = serial bus > subclass = FireWire > bar [10] = type Memory, range 64, base 0xfe9fe800, size 2048, enabled > bar [18] = type I/O Port, range 32, base 0xc800, size 256, enabled > no...@pci0:1:0:1: class=0x018000 card=0x401a1106 chip=0x401a1106 rev=0x00 > hdr=0x00 > vendor = 'VIA Technologies, Inc.' > class = mass storage > bar [10] = type Memory, range 64, base 0xfe9ff000, size 2048, enabled > no...@pci0:1:0:2: class=0x080501 card=0x401b1106 chip=0x401b1106 rev=0x00 > hdr=0x00 > vendor = 'VIA Technologies, Inc.' > class = base peripheral > subclass = SD host controller > bar [10] = type Memory, range 64, base 0xfe9ffc00, size 256, enabled > > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-PRERELEASE #30: Thu Jul 15 12:58:20 UTC 2010 > r...@lokschuppen.zs64.net:/usr/obj/usr/src/sys/EISENBOOT amd64 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (2666.65-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant > real memory = 4294967296 (4096 MB) > avail memory = 4080877568 (3891 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of fed1c000, 4000 (3) failed > acpi0: reservation of fed20000, 70000 (3) failed > acpi0: reservation of ffc00000, 300000 (3) failed > acpi0: reservation of fec00000, 1000 (3) failed > acpi0: reservation of fee00000, 1000 (3) failed > acpi0: reservation of f0000000, 4000000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, ddd00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > ACPI Warning: Incorrect checksum in table [OEMB] - 0xCC, should be 0xCB > (20100331/tbutils-354) > cpu1: <ACPI CPU> on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0xbc00-0xbc07 mem > 0xfe400000-0xfe7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 > agp0: <Intel G41 SVGA controller> on vgapci0 > agp0: detected 32764k stolen memory > agp0: aperture size is 256M > vgapci1: <VGA-compatible display> mem 0xfe800000-0xfe8fffff at device 2.1 on > pci0 > pci0: <multimedia, HDA> at device 27.0 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib1 > em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xec00-0xec1f mem > 0xfebe0000-0xfebfffff,0xfeb00000-0xfeb7ffff,0xfebdc000-0xfebdffff irq 16 at > device 0.0 on pci3 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:1b:21:50:0b:f0 > pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci2: <ACPI PCI bus> on pcib2 > re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port > 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at > device 0.0 on pci2 > re0: Using 1 MSI messages > re0: Chip rev. 0x3c000000 > re0: MAC rev. 0x00400000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > re0: Ethernet address: 00:26:18:d5:2c:23 > re0: [FILTER] > pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci1: <ACPI PCI bus> on pcib3 > pci1: <serial bus, FireWire> at device 0.0 (no driver attached) > pci1: <mass storage> at device 0.1 (no driver attached) > pci1: <base peripheral, SD host controller> at device 0.2 (no driver attached) > uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xb400-0xb41f irq 23 > at device 29.0 on pci0 > uhci0: [ITHREAD] > uhci0: LegSup = 0x2f00 > usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 > uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb480-0xb49f irq 19 > at device 29.1 on pci0 > uhci1: [ITHREAD] > uhci1: LegSup = 0x2f00 > usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 > uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb800-0xb81f irq 18 > at device 29.2 on pci0 > uhci2: [ITHREAD] > uhci2: LegSup = 0x2f00 > usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 > uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb880-0xb89f irq 16 > at device 29.3 on pci0 > uhci3: [ITHREAD] > uhci3: LegSup = 0x2f00 > usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe3f7c00-0xfe3f7fff > irq 23 at device 29.7 on pci0 > ehci0: [ITHREAD] > usbus4: EHCI version 1.0 > usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > atapci1: <Intel ICH7 SATA300 controller> port > 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f irq 19 > at device 31.2 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > uart0: console (115200,n,8,1) > orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > ZFS filesystem version 3 > ZFS storage pool version 14 > Timecounters tick every 1.000 msec > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > ad4: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata2-master UDMA100 SATA > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <Intel> at usbus4 > uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 > SMP: AP CPU #1 Launched! > Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > Root mount waiting for: usbus4 > uhub4: 8 ports with 8 removable, self powered > Trying to mount root from ufs:/dev/ad4s1a > ugen0.2: <ftdi> at usbus0 > uftdi0: <usb serial converter> on usbus0
This dmesg + pciconf -lvc doesn't show any signs of ichwd in use. I can confirm that ichwd(4) works fine on the following system types: - Supermicro SuperServer 5015M-T+ (Intel ICH7R-based) - Supermicro SuperServer 5015B-MT (Intel ICH9R-based) - Supermicro X7SBA motherboard (Intel ICH9R-based) - Supermicro X7SBL-LN2 motherboard (Intel ICH9R-based) The Asus P5G41 looks like a workstation-class board[1]. I wouldn't be surprised if certain configuration bits aren't being set by the system BIOS or during the manufacturing process by Asus for this reason. All in all, I really wouldn't worry about ichwd(4) not working for you. If your system randomly locks up, you try to investigate the root cause and solve it. Hardware watchdogs are usually a server-focused feature. Regarding SW_WATCHDOG, it doesn't work on SMP systems, which yours is. So don't bother. [1]: http://commercial.asus.com/product/detail/18 -- | Jeremy Chadwick j...@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
