> > just hangs, I guess because its having trouble reading from the disk. > If I hit CTRL+t, I see > > load: 0.00 cmd: csh 73167 [vnread] 22.32r 0.00u 0.00s 0% 3232k > load: 0.00 cmd: csh 73167 [vnread] 22.65r 0.00u 0.00s 0% 3232k > load: 0.00 cmd: csh 73167 [vnread] 22.96r 0.00u 0.00s 0% 3232k > load: 0.00 cmd: csh 73167 [vnread] 23.20r 0.00u 0.00s 0% 3232k > load: 0.00 cmd: csh 73167 [vnread] 23.40r 0.00u 0.00s 0% 3232k > load: 0.00 cmd: csh 73167 [vnread] 23.61r 0.00u 0.00s 0% 3232k > >
Hi, i have similar problems on a i7 system with a 3ware 9650SE controller and a simple 2 disk RAID1 configuration. I can trigger it by just extracting the ports tree onto the raid. It usually stops several times for over a minute doing nothing before continuing. While building KDE it stopped for good when extracting a port. The bsdtar process was hanging there in the wdrain status. Waited over 60 minutes before interrupting the process. I haven't seen any messages in dmesg. I'll try to build with debug support tonight and see if it makes a difference. The version was the one delivered with the PC-BSD 8.1RC discs but also after upgrading to the newest RELENG_8 sources the problem persists. The hardware is fairly new and other OSes show no problems so i'm inclined to say that the hardware isn't faulty ;) I could also try to install a 8.0 system if it helps to determine if a regression in 8.1 is the problem. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
