On Mon, Jun 28, 2010 at 07:56:00AM -0700, Jeremy Chadwick wrote:
>
> Three other things to provide output from if you could (you can X out IPs
> and MACs too), from both client and server:
>
> 6) netstat -idn
server:
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs
Coll Drop
nfe0 1500 <Link#1> 00:22:15:b4:2d:XX 1767890778 0 0 872169302
0 0 0
nfe0 1500 172.XX.XX.0/2 172.XX.XX.4 1767882158 - - 1964274616
- - -
lo0 16384 <Link#2> 3728 0 0 3728 0
0 0
lo0 16384
(28)00:00:00:00:00:00:fe:80:00:02:00:00:00:00:00:00:00:00:00:00:00:01 3728
0 0 3728 0 0 0
lo0 16384
(28)00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:01 3728
0 0 3728 0 0 0
lo0 16384 127.0.0.0/8 127.0.0.1 3648 - - 3664 -
- -
client:
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs
Coll Drop
re0 1500 <Link#1> e0:cb:4e:cd:d3:XX 955288523 0 0 696819089
0 0 0
re0 1500 172.XX.XX.0/2 172.XX.XX.2 955279721 - - 696814499
- - -
lo0 16384 <Link#2> 3148 0 0 3148 0
0 0
lo0 16384
(28)00:00:00:00:00:00:fe:80:00:02:00:00:00:00:00:00:00:00:00:00:00:01 3148
0 0 3148 0 0 0
lo0 16384
(28)00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:01 3148
0 0 3148 0 0 0
lo0 16384 127.0.0.0/8 127.0.0.1 3112 - - 3112 -
- -
> 7) sysctl hw.pci | grep msi
both server and client:
hw.pci.honor_msi_blacklist: 1
hw.pci.enable_msix: 1
hw.pci.enable_msi: 1
> 8) Contents of /etc/sysctl.conf
server and client:
# 4 virtual channels
dev.pcm.0.play.vchans=4
# Read modules from /usr/local/modules
kern.module_path=/boot/kernel;/boot/modules;/usr/local/modules
# Remove those annoying ARP moved messages:
net.link.ether.inet.log_arp_movements=0
# 32MB write cache on disk controllers system-wide
vfs.hirunningspace=33554432
# Allow users to mount file systems
vfs.usermount=1
# misc
net.link.tap.user_open=1
net.inet.ip.forwarding=1
compat.linux.osrelease=2.6.16
debug.ddb.textdump.pending=1
# for NFSv4
kern.ipc.maxsockbuf=524288
> > server, immediately after restarting all of nfs scripts (rpcbind
> > nfsclient nfsuserd nfsserver mountd nfsd statd lockd nfscbd):
> >
> > Jun 27 18:04:44 rpcbind: cannot get information for udp6
> > Jun 27 18:04:44 rpcbind: cannot get information for tcp6
>
> These two usually indicate you removed IPv6 support from the kernel,
> except your ifconfig output (I've remove it) on the server shows you do
> have IPv6 support. I've been trying to get these warnings removed for
> quite some time (PR kern/96242). They're harmless, but the
> inconsistency here is a little weird -- are you explicitly disabling
> IPv6 on nfe0?
I have WITHOUT_IPV6= in my make.conf on all my machines (or I have
problems with jdk1.6) and WITHOUT_INET6= in my src.conf. I'm not sure
why the rpcbind/ifconfig binaries have a different concept than the
kernel since I always "make buildworld kernel" and keep things in sync
with mergemaster when I reboot. I'm building new worlds/kernels now
to see if that makes any difference.
-- Rick C. Petty
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
