>> >> Hello all.
>> >>
>> >> I try to install the Beta of 8.1 but it panics on my server HP
>> Proliant ML110
>>
>>>Stacktrace would be helpful.
>>
>> Well at startup, the keyboard is not working, i can not select any boot
>> mode, and after the timer is at 0 ti boots, and then ends with this
>> panic, and totally hangs.
>> 8.0 works fine also CURRENT Works!
>Regarding the keyboard not working -- it should still be working during
>the loader phase (FreeBSD logo, press 4 for single user, etc.), correct?
>If so, two things to try. Escape to the loader prompt and try one of
>the below (if (a) doesn't work, try (b)):
>a) set hint.kbdmux.0.disabled=1
> boot
>b) set hint.atkbd.0.disabled=1
> set hint.atkbdc.0.disabled=1
> boot
>Hopefully one of these will allow your keyboard to continue functioning
>once the system panics, so that you can provide a backtrace. Thanks.
>
Little update, also 9-CURRENT build today is not able to use the keyboard at
startup, but it boots normal, and after the boot the system works normal.
I did do pciconf and dmesg on the machine from 9-CURRENT.
DMESG
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Fri Jun 11 14:34:42 CEST 2010
r...@hast-master.double-l.local:/usr/obj/usr/src/sys/KRNL amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz (3189.54-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x20652 Family = 6 Model = 25 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x80e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2047291392 (1952 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdfd01800-0xdfd01bff irq 16 at
device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci16: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci26: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci28: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18 at
device 0.0 on pci28
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci30: <ACPI PCI bus> on pcib5
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem
0xdf900000-0xdf90ffff irq 19 at device 0.0 on pci30
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 78:e7:d1:bd:ad:0e
bge0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci32: <ACPI PCI bus> on pcib6
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdfd01c00-0xdfd01fff irq 23 at
device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci48: <ACPI PCI bus> on pcib7
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem
0xdfa00000-0xdfa0007f irq 17 at device 0.0 on pci48
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:fb:e2:37
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PCH SATA300 controller> port
0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810-0x181f,0x1800-0x180f
irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel PCH SATA300 controller> port
0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870-0x187f,0x1860-0x186f
irq 17 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcb7ff,0xdf000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 152627MB <GB0160CAABV HPG1> at ata2-master UDMA100 SATA 1.5Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
acd0: DVDROM <hp DVDROM DH20N/EB00> at ata4-master UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <LiteON> at usbus0
ukbd0: <LiteON HP Basic USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on
usbus0
kbd0 at ukbd0
Root mount waiting for: usbus1 usbus0
ugen1.3: <ServerEngines> at usbus1
ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1
kbd2 at ukbd1
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen0.4: <vendor 0x062a> at usbus0
ums1: <vendor 0x062a product 0x0001, class 0/0, rev 1.10/0.00, addr 4> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/label/rootfs
PCICONF -lv
hos...@pci0:0:0:0: class=0x060000 card=0x3318103c chip=0x00488086 rev=0x12
hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
pc...@pci0:0:1:0: class=0x060400 card=0x00428086 chip=0x00498086 rev=0x12
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
eh...@pci0:0:26:0: class=0x0c0320 card=0x3118103c chip=0x3b3c8086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pc...@pci0:0:28:0: class=0x060400 card=0x3318103c chip=0x3b428086 rev=0x05
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pc...@pci0:0:28:1: class=0x060400 card=0x3318103c chip=0x3b448086 rev=0x05
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pc...@pci0:0:28:2: class=0x060400 card=0x3318103c chip=0x3b468086 rev=0x05
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pc...@pci0:0:28:3: class=0x060400 card=0x3318103c chip=0x3b488086 rev=0x05
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pc...@pci0:0:28:4: class=0x060400 card=0x3318103c chip=0x3b4a8086 rev=0x05
hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
eh...@pci0:0:29:0: class=0x0c0320 card=0x3118103c chip=0x3b348086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pc...@pci0:0:30:0: class=0x060401 card=0x3318103c chip=0x244e8086 rev=0xa5
hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to
PCI Bridge'
class = bridge
subclass = PCI-PCI
is...@pci0:0:31:0: class=0x060100 card=0x3118103c chip=0x3b148086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
atap...@pci0:0:31:2: class=0x01018f card=0x3118103c chip=0x3b208086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX SATA Controller'
class = mass storage
subclass = ATA
no...@pci0:0:31:3: class=0x0c0500 card=0x3318103c chip=0x3b308086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
atap...@pci0:0:31:5: class=0x010185 card=0x3118103c chip=0x3b268086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX SATA Controller'
class = mass storage
subclass = ATA
vgap...@pci0:28:0:0: class=0x030000 card=0x31fa103c chip=0x0522102b rev=0x02
hdr=0x00
vendor = 'Matrox Electronic Systems Ltd.'
device = 'Matrox G200e (ServerEngines) - English (G200e)'
class = display
subclass = VGA
b...@pci0:30:0:0: class=0x020000 card=0x705d103c chip=0x165b14e4 rev=0x10
hdr=0x00
vendor = 'Broadcom Corporation'
class = network
subclass = ethernet
x...@pci0:48:0:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x78
hdr=0x00
vendor = '3COM Corp, Networking Division'
device = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)'
class = network
subclass = ethernet
regards,
Johan Hendriks
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
