hans.da...@eml.cc wrote: > Here's the full and uncensored log: http://pastebin.org/308021 > > On Fri, 04 Jun 2010 19:28:10 +0300, "Alexander Motin" <m...@freebsd.org> > said: >> hans.da...@eml.cc wrote: >>> FreeBSD-stable clandestinely dropped support for my p-ata DVD drive some >>> two or three weeks ago. The relevant "devcontrol list"-entry is still in >>> its place, yet atapicam fails to create "/dev/cd0". >>> >>> # camcontrol devlist >>> <HL-DT-ST DVD-RAM GH22NP20 1.02> at scbus0 target 0 lun 0 (pass0) >>> >>> dmesg reports: >>> ------------------------ >>> (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >>> (probe0:ata0:0:0:0): CAM status: SCSI Status Error >>> (probe0:ata0:0:0:0): SCSI status: Check Condition >>> (probe0:ata0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, >>> reset, or bus device reset occurred) >>> (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 >>> (probe0:ata0:0:0:0): CAM status: SCSI Status Error >>> (probe0:ata0:0:0:0): SCSI status: Check Condition >>> (probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present >>> - tray closed)
I don't see there not only cdX, but also acdX device. So either it is not atapicam problem, or you have custom kernel without both acd and cd drivers. -- Alexander Motin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
