On Fri, Apr 23, 2010 at 10:08 PM, Brandon Gooch <jamesbrandongo...@gmail.com> wrote: > On Sat, Apr 24, 2010 at 4:59 AM, Garrett Cooper <yanef...@gmail.com> wrote: >> On Fri, Apr 23, 2010 at 9:42 PM, Garrett Cooper <yanef...@gmail.com> wrote: >>> On Fri, Apr 23, 2010 at 8:05 PM, Brandon Gooch >>> <jamesbrandongo...@gmail.com> wrote: >>>> 2010/4/23 Garrett Cooper <yanef...@gmail.com>: >>>>> 2010/4/23 Garrett Cooper <yanef...@gmail.com>: >>>>>> 2010/4/18 Olivier Cochard-Labbé <oliv...@cochard.me>: >>>>>>> 2010/4/18 Bernhard Schmidt <bschm...@techwires.net>: >>>>>>>> Are you able to reproduce this on demand? As in type a few commands and >>>>>>>> the firmware error occurs? >>>>>>>> >>>>>>> >>>>>>> No, I'm not able to reproduce on demand this problem. >>>>>> >>>>>> I'm seeing similar issues on occasion with my Lenovo as well: >>>>>> >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: firmware error log: >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: error type = >>>>>> "NMI_INTERRUPT_WDG" (0x00000004) >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: program counter = 0x0000046C >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: source line = 0x000000D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: error data = >>>>>> 0x0000000207030000 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: branch link = >>>>>> 0x00008370000004C2 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: interrupt link = >>>>>> 0x000006DA000018B8 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: time = 4287402440 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: driver status: >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 0: qid=0 cur=1 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 1: qid=1 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 2: qid=2 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 3: qid=3 cur=36 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 4: qid=4 cur=123 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 5: qid=5 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 6: qid=6 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 7: qid=7 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 8: qid=8 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 9: qid=9 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 10: qid=10 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 11: qid=11 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 12: qid=12 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 13: qid=13 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 14: qid=14 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 15: qid=15 cur=0 queued=0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: rx ring: cur=8 >>>>>> >>>>>> This may be because the system was under load (I was installing a port >>>>>> shortly before the connection dropped). I'll try poking at this >>>>>> further because it's going to be an annoying productivity loss :/. >>>>> >>>>> Sorry... should have included more helpful details. >>>>> Thanks, >>>>> -Garrett >>>>> >>>>> dmesg: >>>>> >>>>> iwn0: <Intel(R) PRO/Wireless 4965BGN> mem 0xdf2fe000-0xdf2fffff irq 17 >>>>> at device 0.0 on pci3 >>>>> iwn0: MIMO 2T3R, MoW1, address 00:1d:e0:7d:9f:c7 >>>>> iwn0: [ITHREAD] >>>>> iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps >>>>> iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps >>>>> iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps >>>>> 24Mbps 36Mbps 48Mbps 54Mbps >>>>> >>>>> pciconf -lv snippet: >>>>> >>>>> i...@pci0:3:0:0: class=0x028000 card=0x11108086 chip=0x42308086 >>>>> rev=0x61 hdr=0x00 >>>>> vendor = 'Intel Corporation' >>>>> device = 'Intel Wireless WiFi Link 4965AGN (Intel 4965AGN)' >>>>> class = network >>>>> c...@pci0:21:0:0: class=0x060700 card=0x20c617aa chip=0x04761180 >>>>> rev=0xba hdr=0x02 >>>>> >>>>> uname -a: >>>>> >>>>> $ uname -a >>>>> FreeBSD garrcoop-fbsd.cisco.com 8.0-STABLE FreeBSD 8.0-STABLE #0 >>>>> r207006: Wed Apr 21 13:18:44 PDT 2010 >>>>> r...@garrcoop-fbsd.cisco.com:/usr/obj/usr/src/sys/LAPPY_X86 i386 >>>> >>>> I'm actually looking at this right now. For me, it's actually >>>> happening when my machine stays on overnight (or for long periods of >>>> time, idle). >>>> >>>> Also, it seems to be causing the kernel to panic, although I'm now >>>> wondering if the Machine Check Architecture is somehow catching this >>>> device error and causing an exception (hw.mca.enabled=1)(?) -- not >>>> possible, right ??? >>>> >>>> Whatever the case, I can't seem to get the firmware error to occur >>>> with iwn(4) debugging or wlandebug options enabled, so who knows >>>> exactly what leads to this. >>>> >>>> I know Bernhard has worked hard on this driver, it's a shame that this >>>> freaky bug has bit us all now, without leaving many clues :( >>>> >>>> I've attached a textdump for posterity if nothing else :) >>> >>> Connectivity appears to be shoddy in my neck of the woods (kind of >>> ironic... but meh). Just running buildworld, buildkernel, then doing a >>> tcpdump in parallel causes the pseudo device to go up and down a lot. >>> I assume this isn't standard behavior? >>> Just for reference buildworld was started shortly after 19:39:05, >>> and it finished at 21:29. The interface has also gone up and down once >>> since then while the system's been basically idle. >> >> Hmmm... I'm seem to be in an excellent position to reproduce this >> issue. I've reproduced it twice by merely bringing the interface up >> and down several times using: >> >> ifconfig_wlan0="WPA DHCP" >> >> instead of my usual: >> >> ifconfig_wlan0="WPA ssid <base-station-id1> DHCP" >> >> Maybe others who are experiencing the issue should try that? I'll >> do more testing when I get home... > > My rc.conf is: > > ifconfig_wlan0="WPA DHCP" > > ...as well, although I haven't tried manually taking the interface > down and bringing it back up.
Hmmm... that is interesting. I wish I could do that, but it seems to be alluding my grasp right now. The driver just kind of freaks out with a bunch of SSIDs, one being my target SSID, a bunch of NUL string ones, and then finally it just croaks. I need to figure out whether or not the SSIDs are valid when I boot it up at my desk again. > Are you waiting for the device to associate and begin passing traffic > before you each up/down cycle? I was, but I'm not sure whether or not the Ajax pieces in GMail were. I'll try some more rudimentary tests when I get back to work on Monday in that environment, but I need to try out other things at home as well in the meantime. Thanks, -Garrett _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
