On Fri, Feb 19, 2010 at 12:24:28AM +0300, Slawa Olhovchenkov wrote: > On Thu, Feb 18, 2010 at 11:36:12AM -0800, Pyun YongHyeon wrote: > > > On Thu, Feb 18, 2010 at 05:38:22PM +0300, Slawa Olhovchenkov wrote: > > > On Tue, Feb 16, 2010 at 09:57:19AM -0800, Pyun YongHyeon wrote: > > > > > > > On Sun, Feb 14, 2010 at 10:04:58AM -0800, Nick Rogers wrote: > > > > > I'm having repeated kernel panic issues on 8.0-RELEASE/amd64. Can > > > > > anyone > > > > > shed light on the below error? I unfortunately cannot provide a > > > > > proper crash > > > > > dump. The pointer addresses are always the same. The only other thing > > > > > I've > > > > > noticed that may be related is a watchdog timeout on bge0 error > > > > > before the > > > > > panic. Thanks. > > > > > > > > > > > > > Any chance to get backtrace from the crash? > > > > > > I got same trouble on the same platform (8.0-STABLE/amd64). > > > hw.bge.allow_asf=0 already > > > > > > I got 2 proper crash dump (first w/ net.inet.ip.forwarding=1 > > > and second w/ net.inet.ip.forwarding=0). > > > > > > > It looks like mbuf pointer was changed to NULL in the middle of IP > > forwarding and IP fragment stage. If bge(4) frees passed mbufs this > > may happen but I'm not sure this comes from bge(4). > > By chance, are you using polling(4) on bge(4)? Also show me the > > I am not using polling. >
Ok. > > dmesg output(only bge(4) related one). > > dmesg from boot: > > bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem > 0xfdf70000-0xfdf7ffff irq 25 at device 2.0 on pci2 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge0: Ethernet address: 00:14:c2:3d:e5:52 > bge0: [ITHREAD] > bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem > 0xfdf60000-0xfdf6ffff irq 26 at device 2.1 on pci2 > miibus1: <MII bus> on bge1 > brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge1: Ethernet address: 00:14:c2:3d:e5:51 > bge1: [ITHREAD] > bge1: link state changed to UP > bge0: link state changed to UP > > Nothing in dmesg before trap. > Is this PCI-X controller? It would be even better if you can post bge(4) related dmesg output of verbosed boot and the output of "pciconf -lcv". _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
