I'm getting: cc -c -O2 -frename-registers -pipe -fno-strict-aliasing -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/usr/src/sys -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-omit-frame-pointer -mcmodel=kernel -mno-red-zone -mfpmath=387 -mno-sse -mno-sse2 -mno-sse3 -mno-mmx -mno-3dnow -msoft-float -fno-asynchronous-unwind-tables -ffreestanding -fstack-protector -Werror /usr/src/sys/cam/ata/ata_xpt.c /usr/src/sys/cam/ata/ata_xpt.c: In function 'probestart': /usr/src/sys/cam/ata/ata_xpt.c:331: error: 'ATA_SF_PUIS_SPINUP' undeclared (first use in this function) /usr/src/sys/cam/ata/ata_xpt.c:331: error: (Each undeclared identifier is reported only once /usr/src/sys/cam/ata/ata_xpt.c:331: error: for each function it appears in.) /usr/src/sys/cam/ata/ata_xpt.c: In function 'probedone': /usr/src/sys/cam/ata/ata_xpt.c:789: error: 'ATA_RESP_INCOMPLETE' undeclared (first use in this function) *** Error code 1
Stop in /usr/obj/usr/src/sys/BORG. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. with a RELENG_8 csup'ed yesterday. Any ideas? kernel Config: # # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.475 2007/04/10 21:40:12 pjd Exp $ cpu HAMMER ident BORG # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_4BSD # 4BSD scheduler options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options NFSLOCKD # Network Lock Manager options NTFS # NT File System options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_IA32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #8+ options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev ###8+ default now #options ADAPTIVE_GIANT # Giant mutex is adaptive. #options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT options INCLUDE_CONFIG_FILE # Debugging for use in -current options KDB # Enable kernel debugger support. options KDB_TRACE # Enable kernel debugger support. options KDB_UNATTENDED # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options STACK #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # Bus support. device acpi device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives device atapicam # ATA CAM Layer options ATA_STATIC_ID # Static device numbering device ahci # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) device sg # Linux SG Stuff #---- device pt #SCSI processor device targ #SCSI Target Mode Code device targbh #SCSI Target Mode Blackhole Device #---- # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Serial (COM) ports #device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. device em # Intel PRO/1000 adapter Gigabit Ethernet Card # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # 802.11 AMRR support # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners ############# # The cpufreq(4) driver provides support for non-ACPI CPU frequency control #device cpufreq # Direct Rendering modules for 3D acceleration. device drm # DRM core module required by DRM drivers device radeondrm # ATI Radeon options HWPMC_HOOKS device smbus # Bus support, required for smb below. device intpm device ichsmb device smb device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device crypto # core crypto support device cryptodev # /dev/crypto for access to h/w device rndtest # FIPS 140-2 entropy tester device ipmi device smbios options SCTP #options BREAK_TO_DEBUGGER #options ALT_BREAK_TO_DEBUGGER device coretemp # Core temp (CORE procs and newer) #ungarble messages options PRINTF_BUFR_SIZE=128 #####KTR Stuff options KTR options KTR_COMPILE=(KTR_SCHED) options KTR_MASK=(KTR_SCHED) options KTR_ENTRIES=262144 -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683 E-Mail: l...@lerctr.org US Mail: 430 Valona Loop, Round Rock, TX 78681-3893 _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
