Hello,
This weekend I was setting up the newly acquired acer notebook and all went
really well (being my first notebook install).
>> Specifications:
==================
Processor - Intel Celeron 466MHz
Core Logic - Intel 440MX
Video Subsystem - NeoMagic MagicGraph 128XD
(works flawlessly with neomagic driver and little effort)
CD-ROM Drive - 24X TEAC CD-224E
Sound Subsystem - Crystal/Cirrus Logic CL4299
(no luck thus far)
PCCard Support - O2Micro OZ6812 CardBus Controller : 1 Type III or 1 Type II
(recognized and worked with a KNE-PC2T PCMCIA adapter)
Pointing Device - Touchpad by Synaptics
(running with the psm driver)
Modem - Lucent Technologies Soft Modem - AMR
( :-) )
I installed 4.0-Stable dated June 8th, breaking all the rules and installing
XFree86-4.0 from ports. I am wondering about what might get the sound to work
with this puppy?
I have tried:
device pcm
device gusc
device sbc
device csa
and have added:
options PNPBIOS
in the kernel with no luck. I have even added what I thought would be good
values for these using "at isa?" values to no avail. Any help would be
appreciated.
>>Verbose dmesg output:
=======================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000608-STABLE #0: Sun Jun 11 23:51:54 PDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/TALC
Calibrating clock(s) ... TSC clock: 466553861 Hz, i8254 clock: 1193128 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (466.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003a8000 - 0x03fe7fff, 63176704 bytes (15424 pages)
avail memory = 61616128 (60172K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry = 0xf0210 (c00f0210) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at 0xc00f61a0
pnpbios: Entry = fa000:0 Rev = 1.0
pnpbios: Event flag at 4b0
Other BIOS signatures found:
ACPI: 000fe030
Preloaded elf kernel "kernel" at 0xc038f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038f09c.
Preloaded elf module "splash_bmp.ko" at 0xc038f0ec.
Preloaded splash_image_data "/boot/505.bmp" at 0xc038f190.
VESA: information block
56 45 53 41 00 02 1f 01 00 01 00 00 00 00 22 00
00 01 1f 00 1d 01 00 01 00 01 09 01 00 01 1a 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 12 01 13 01 14 01 15 01 16 01
VESA: 20 mode(s) found
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc02c2dc2 (1000022)
VESA: MagicGraph 128XD 40K SVGA BIOS
VESA: NeoMagic MagicGraph 128XV 01.0
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
splash: image@0xc03180c8, size:481022
bmp_start(): splash_mode:259
splash: image decoder found: splash_bmp
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=71948086)
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=71948086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7194, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7195, revid=0x00
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
found-> vendor=0x8086, dev=0x7196, revid=0x00
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
found-> vendor=0x10c8, dev=0x0004, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 06000000, size 24
map[14]: type 1, range 32, base 05400000, size 21
map[18]: type 1, range 32, base 05300000, size 20
found-> vendor=0x1217, dev=0x6872, revid=0x05
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
found-> vendor=0x8086, dev=0x7198, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7199, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00008000, size 4
found-> vendor=0x8086, dev=0x719a, revid=0x00
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[20]: type 1, range 32, base 00007cc0, size 5
found-> vendor=0x8086, dev=0x719b, revid=0x00
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x7195) at 0.1 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x7196) at 0.2 irq 11
pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at
2.0 irq 5
chip1: <PCI to CardBus bridge (vendor=1217 device=6872)> irq 11 at device 6.0 on
pci0
isab0: <PCI to ISA bridge (vendor=8086 device=7198)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x8000-0x800f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x8000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x8008
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
uhci0: <UHCI (generic) USB controller> port 0x7cc0-0x7cdf irq 10 at device 7.2
on pci0
uhci0: (New UHCI DeviceId=0x719a8086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x719a8086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip2: <PCI to Other bridge (vendor=8086 device=719b)> at device 7.3 on pci0
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 14 devices, largest 126 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: end config
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 1 device ID PNP0000 (0000d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 00x1
PNP0100: end config
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x73, size=0x4, align=0
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0
PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0
PNP0c01: adding memory32 range 0xffff0000-0xffffffff, size=0x10000, align=0
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding memory32 range 0x100000-0xffffff, size=0xf00000, align=0
PNP0c02: adding memory32 range 0x1000000-0x3ffffff, size=0x3000000, align=0
PNP0c02: adding io range 0xf000-0xf03f, size=0x40, align=0
PNP0c02: adding io range 0xf100-0xf11f, size=0x20, align=0
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding io range 0x62-0x62, size=0x1, align=0
PNP0303: adding io range 0x66-0x66, size=0x1, align=0
PNP0303: adding irq mask 00x2
PNP0303: end config
pnpbios: handle 9 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 11 device ID PNP0f13 (130fd041)
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0
PNP0401: adding dma mask 0x2
PNP0401: end config
pnpbios: handle 13 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 15 device ID PNP0700 (0007d041)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 11
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
unknown0: <PNP0a03> at port 0xcf8-0xcff,0x4d0-0x4d1 on isa0
unknown: <PNP0000> can't assign resources
unknown1: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown2: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown3: <PNP0b00> at port 0x70-0x73 irq 8 on isa0
unknown4: <PNP0800> at port 0x61 on isa0
unknown5: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown6: <PNP0c01> at iomem 0-0x9ffff,0xe0000-0xfffff,0xffff0000-0xffffffff on
isa0
unknown7: <PNP0c02> at port 0xf000-0xf03f,0xf100-0xf11f,0x80,0x92 iomem
0x100000-0xffffff,0x1000000-0x3ffffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
BIOS Geometries:
0:024efe3f 0..590=591 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 40084440, tty 40031092, net 40071092
bpf: sl0 attached
ata0-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <IBM-DBCA-204860/BC3OA87F> ATA-4 disk at ata0 as master
ad0: 4645MB (9514260 sectors), 10068 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Creating DISK wd0
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-slave: success setting up PIO4 mode on generic chip
acd0: <CD-224E/1.5A> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-DA stream
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
ad0s1: type 0xb, start 63, end = 5365709, size 5365647 : OK
ad0s2: type 0xa5, start 5365710, end = 9510479, size 4144770 : OK
start_init: trying /sbin/init
pcic: I/O win 0 flags 15 300-31f
pcic: I/O win 0 flags 5 300-31f
ed0 at port 0x300-0x31f irq 3 slot 0 on pccard0
pcic: I/O win 0 flags 15 300-31f
ed0: address 00:c0:f0:3d:96:a8, type NE2000 (16 bit)
bpf: ed0 attached
Linux-ELF exec handler installed
--
Regards, )))))) )))))) ))))))
Kevin G. Eliuk )) )) )) )) ))
)) http://www.FreeBSD.org ))
"Change your operating system, )) )) )) )) ))
and You can change your World." )))))) )))))) ))))))
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
