Hello all I am on 8.0-STABLE now, and using the ahci driver. All works likei t should, but i can not mount my cdrom anymore as a regular user.
i have this in my sysctl.conf vfs.usermount=1 my /etc/devfs.conf looks like this #CDROM_BURNER permissions perm acd0 0666 #perm acd1 0666 perm cd0 0666 #perm cd1 0666 perm cdrom 0666 #perm cdrom1 0666 perm pass0 0660 perm pass1 0660 perm pass2 0660 perm pass3 0660 perm pass4 0660 perm pass5 0660 perm pass6 0666 perm xpt0 0660 dmesg list the following atapci0: <Marvell 88SX6121 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfe9ffc00-0xfe9fffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] acd0: DVDR <LITE-ON DVDRW SHW-160H6S/CS01> at ata2-slave UDMA66 later on in my dmesg i get the following acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,1 (probe0:ata0:0:1:0): Medium not present - tray closed (probe0:ata0:0:1:0): Unretryable error cd0 at ata0 bus 0 scbus8 target 1 lun 0 cd0: <LITE-ON DVDRW SHW-160H6S CS01> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: cd present [329835 x 2048 byte records] my cdrom is attached to the pata port on the mainbord. Regards, Johan _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
