Hello Sam, Sunday, December 27, 2009, 12:05:34 PM, you wrote:
> I didn't see anything in the thread to point a finger at freebsd but > given the debug msg log shows "ath0" instead of "wlan0" I'm guessing > whatever version was being used was pre-8.x. I think I was the only one in thread who used FreeBSD as an AP, also that was before 7.x when I made the log. So I'm not saying it's FreeBSD specific problem, I don't even think it's a BSD problem, but perhaps some kind of incompatibility and I was hoping for some workaround. > Unlikely. Try collecting a packet trace of a failure w/ wireshark or > tcpdump from a 3rd sta and send it to me. Be sure to collect data at > the 802.11 layer (e.g. -y IEEE802_11_RADIO). You might also learn > something by enabling power save debug msgs on the ap w/ wlandebug. Well, I actually managed it to work. Since the phone was rooted I changed settings and disabled WME on the phone. I associated it and it worked. Now there's a weird thing that I don't really get. After I saw that phone was working with WME disabled, I went back and changed it to the way it originally was, I also restarted the phone. To my surprise the phone continued to work (with WME enabled), and I still don't understand why. Perhaps it stored some information necessary? I think I'll deassociate the phone and make it forget the AP and see if it works. -- Best regards, Derek mailto:tak...@takeda.tk You know it's love when you memorize her IP number to skip DNS overhead _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
