>> Hello all
>> I just installed FreeBSD 8.0RC1 AMD64 on my new HP Proliant ML150 G6
>> server.
>> It fails to detect the Broadcom network interface.
>>
>>
>>
>> Pciconf -lv gives me the following.
>>
>> no...@pci0:4:0:0: class=0x020000 card=0x705d10c
chip=0x165b14e4
>> rev=0x10
>> hdr=0x00
>>
>> vendor = 'Broadcom Corporation'
>> class = network
>>
>> Subclass = Ethernet
>>
>>
>>
>> Is there something I can do, other than install an other network
card?
>I think you can just patch the bge(4) driver to add support for your
>adapter.
>It looks like a BCM5723 from the PCI ID. Support for it was just added
in
>9.0 as part of change 197832, but I suspect it might not need all the
other
>patches from that change. Try this diff:
>Index: if_bgereg.h
>===================================================================
>--- if_bgereg.h (revision 197831)
>+++ if_bgereg.h (revision 197832)
>@@ -2101,6 +2123,7 @@
> #define BCOM_DEVICEID_BCM5720 0x1658
> #define BCOM_DEVICEID_BCM5721 0x1659
> #define BCOM_DEVICEID_BCM5722 0x165A
>+#define BCOM_DEVICEID_BCM5723 0x165B
> #define BCOM_DEVICEID_BCM5750 0x1676
> #define BCOM_DEVICEID_BCM5750M 0x167C
> #define BCOM_DEVICEID_BCM5751 0x1677
>Index: if_bge.c
>===================================================================
>--- if_bge.c (revision 197831)
>+++ if_bge.c (revision 197832)
>@@ -170,6 +170,7 @@
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5720 },
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5721 },
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5722 },
>+ { BCOM_VENDORID, BCOM_DEVICEID_BCM5723 },
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5750 },
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5750M },
> { BCOM_VENDORID, BCOM_DEVICEID_BCM5751 },
Like I said in my first answer, the device is detected with these lines.
Only if I enable the device it can not boot.
If I boot with the inserted em0 interface and the change in the rc.conf
file the em0 into bge0 and do a /etc/netstart, the systems hangs, only a
power cycle can reclaim the server.
I have installed FreeBSD 9.0Current on the machine and here it works
fine
I saw a commit from Bjoern A. Zeeb which describe the hang, but do not
know if this can be reverted back to 8.x before the release.
svn commit: r198049 - head/sys/dev/bge Bjoern A. Zeeb
regards, and thank you for your time.
cc'ed stas@ and bz@ ( hope they do not mind, if so I am sorry)
Johan Hendriks
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.32/2459 - Release Date:
10/25/09 19:57:00
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
