I have a very cheap USB CF/SD/SM/MS connected to an 8.0-RC1 system and it is detected, ie.. Sep 27 14:29:18 midget kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Sep 27 14:29:18 midget kernel: da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device Sep 27 14:29:18 midget kernel: da0: 40.000MB/s transfers Sep 27 14:29:18 midget kernel: da0: Attempt to query device size failed: NOT READY, Medium not present Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): CAM Status: SCSI Status Error Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): SCSI Status: Check Condition Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0 Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): Medium not present Sep 27 14:29:18 midget kernel: (probe7:umass-sim0:0:0:1): Unretryable error Sep 27 14:29:18 midget kernel: da1 at umass-sim0 bus 0 target 0 lun 1 Sep 27 14:29:18 midget kernel: da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device Sep 27 14:29:18 midget kernel: da1: 40.000MB/s transfers Sep 27 14:29:18 midget kernel: da1: Attempt to query device size failed: NOT READY, Medium not present
If I connect a CF card to da1 and run 'fdisk da1' I get.. [midget 0:06] ~ >fdisk da1 load: 0.29 cmd: fdisk 69630 [cgticb] 1.50r 0.00u 0.00s 0% 1160k load: 0.19 cmd: fdisk 69630 [cbwait] 24.42r 0.00u 0.00s 0% 1160k load: 0.19 cmd: fdisk 69630 [cbwait] 27.01r 0.00u 0.00s 0% 1160k fdisk: unable to get correct path for da1: Input/output error [midget 0:05] ~ >sudo usbconfig -u 5 -a 2 dump_device_desc ugen5.2: <Mass Storage Device Generic> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x058f idProduct = 0x6362 bcdDevice = 0x0129 load: 0.21 cmd: usbconfig 69643 [WCTRL] 1.73r 0.00u 0.00s 0% 1080k iManufacturer = 0x0001 <retrieving string failed> load: 0.19 cmd: usbconfig 69643 [WCTRL] 8.56r 0.00u 0.00s 0% 1104k iProduct = 0x0002 <retrieving string failed> iSerialNumber = 0x0003 <retrieving string failed> bNumConfigurations = 0x0001 Perhaps some quirk would help but I'm not sure which one :) -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
signature.asc
Description: This is a digitally signed message part.
